Icom MA-510TR Скачать руководство пользователя

Страница: 20 / 64

BASIC OPERATION

■

Using the Main screen

There are 4 types of Main screens, AIS, AIS and Steering, AIS and Highway, and

Highway screen (only for watching).

In the AIS screen, the display range, the icons of the AIS target or waypoint, and GPS

data are displayed. You can change the display range and type, depending on your

operating style.

Push [DISP] several times to select the AIS screen.

Push [▲] or [▼] to select the desired display range.

•“Calculating” is displayed.

See “DISPLAY RANGE” on page 12 for the

selectable display range.

Push [◄] or [►] to select an AIS target or waypoint.

•A target box is displayed around the selected target.

(p. 13)

•The selected target’s information is displayed in the

information box. (p. 12)

The contents of the information box may differ,

depending on the selected target. (p. 15)

See “Waypoint” on page 24 for details.

TIP:

•

Push [►] to sequentially select each target that is

closest to your vessel.

•

Push [◄] to sequentially select each target that is

farthest from your vessel.

4. Push [ENT] to display the Menu window.

•The Menu window is displayed.

Select “Details,” and then push [ENT] to display the

detail screen. (p. 19)

•

The “DETAILS” screen is displayed.

NOTE:

An alarm sounds when a malfunction occurs, an

AIS target is closer than the CPA and TCPA settings, and

so on, depending on the presetting. To stop the alarm

buzzer, push any key.

If the popup screen is displayed, push any key again to

turn it OFF.

Содержание MA-510TR

































































Результаты поиска

Содержание MA-510TR

Отзывы:

Похожие инструкции для MA-510TR

Бренды по названию

Популярные бренды

Icom MA-510TR, Инструкция по эксплуатации

Результаты поиска

Содержание MA-510TR

Отзывы:

Похожие инструкции для MA-510TR

Бренды по названию

Популярные бренды