Icom MA-510TR Скачать руководство пользователя

Страница: 48 / 64

CONNECTIONS AND INSTALLATION

■

GPS antenna connection

NOTE:

Be sure the GPS antenna is positioned where the GPS antenna has a clear

view to receive signals from satellites.

Installation

1. Mount the bracket securely to the desired position.

Screws for mounting the bracket are user supplied.

2. Insert the GPS antenna to the bracket, and then

rotate it clockwise until it is completely tightened.

Connection

Insert the GPS antenna cable to the GPS antenna

connector, and then rotate it clockwise until it is

completely tightened. (p. 40)

Attention

About calculating position

The GPS antenna acquires signals from GPS satellites. It calculates its position by the

orbit information of the GPS satellites and needs to measure the distance between itself

and three or more GPS satellites to obtain a reliable position. The GPS antenna acquires

all available satellites when it is powered up. Normally, it takes approximately 1 minute to

determine a position.

In places where the GPS signals cannot reach the GPS antenna, it may show position

errors (misplacement) or no position reading at all.

As the satellites are continuously moving, measurement of the position or time by

the GPS antenna may take a while, and/or no position reading can be made in some

instances. Even if the GPS antenna acquires signals from three or more GPS satellites, it

may take a longer time to determine a position depending on the satellite locations.

Location precision

The GPS device automatically calculates its position when it acquires signals from three

or more GPS satellites.

The position error using the GPS is about ±10 meters. However, this can vary up to

several hundred meters, depending on the surrounding environment. The GPS information

and its accuracy varies, depending on the GPS system being acquired, place and time.

About NMEA sentences

When the current position data cannot be received due to the GPS signal being blocked

by something, the GPS antenna sends the last memorized NMEA sentence, but the

sentence may include invalid data.

Содержание MA-510TR

































































Результаты поиска

Содержание MA-510TR

Отзывы:

Похожие инструкции для MA-510TR

Бренды по названию

Популярные бренды

Icom MA-510TR, Инструкция по эксплуатации

Результаты поиска

Содержание MA-510TR

Отзывы:

Похожие инструкции для MA-510TR

Бренды по названию

Популярные бренды