background image

33

7

MENU ITEMS

 

Menu items description

 

D

Navigation settings

Waypoint

Displays the Waypoint list.

 

L

See page 24 for details.

Reset navigation

The transponder resets the start position, and 

restarts navigation from your current position.

 

L

See page 29 for details.

Track

 

z

Display

You can select whether or not to display 

the vessel track on the plotter display.

 

L

The vessel track is recorded, 

regardless of this setting.

ON:  The vessel track is displayed.

OFF:  The vessel track is not displayed.

 

z

Record

You can select whether or not to save 

the vessel track.

ON:  The vessel track is saved.

OFF:  The vessel track is not saved.

 

z

Clear track

You can delete the vessel track.

 

L

When “Clear track. Are you sure?” is 

displayed, select “OK,” and then push 

[ENT].

 

z

Record reference

You can select the setting to record the 

vessel track.

Distance:   The vessel track is recorded 

for a fixed distance.

Time: 

 The vessel track is recorded 

for a fixed period of time.

 

z

Interval (Distance)

Set the distance to record the vessel 

track to between 0.01 and 6.00 NM (in 

0.01 NM steps), or between 0.02 and 

11.11 km (in 0.01 km steps), when you 

select “Distance” in the Record reference.

 

z

Interval (Time)

Set the period of time to record the 

vessel track to between 1 and 60 

seconds (in 1 second steps) when you 

select “Time” in the Record reference.

Anchor watch

 

z

Function

You can select whether or not to sound 

an alarm when your vessel is at anchor, 

and has drifted.

 

z

Range

Set the range to sound an alarm when 

your vessel is at anchor, and has drifted 

to between 0.01 and 6.00 NM (in 0.01 

NM steps), or between 0.02 and 11.11 

km (in 0.01 km steps).

Arrival alarm range

Set the range to sound an alarm when your 

vessel arrives at or near the destination to 

between 0.01 and 6.00 NM (in 0.01 NM 

steps), or between 0.02 and 11.11 km (in 

0.01 km steps).

XTE alarm range

Set the range to sound an alarm when 

your vessel goes off course to between 

0.01 and 6.00 NM (in 0.01 NM steps), or 

between 0.02 and 11.11 km (in 0.01 km 

steps).

Содержание MA-510TR

































































Отзывы: