Icom MA-510TR, Инструкция по эксплуатации

Страница: 13 / 64

4
3
7
4
10
15
18
8
13
5
11
16
9
14
6
12
17
1
2
3
PREPARATION
■
Entering the MMSI code
The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits.
This initial code can be entered only once.
After entering, it can be changed only by your dealer or distributor.
If your MMSI code has already been entered, doing the steps below is not necessary.
1. Hold down [ ] for 1 second to turn ON the transponder.
•When the language that you use is not set, the
“LANGUAGE” screen is displayed. (p. 36)
L
Push [CLR] to skip the setting. If the language is not
set, the transponder displays in English.
•Three short beeps sound, and “Push [ENT] to register
your MMSI. You can enter between 200000000 and
799999999.” is displayed.
2. Push [ENT] to start entering the MMSI code.
•The “MMSI INPUT” screen is displayed.
L
Push [CLR] three times to skip the entry. If you skip
the entry, the transponder operates as just an AIS
receiver. After skipping, you can also enter the code in
“MMSI” on the Menu screen. (p. 6)
[MENU] > AIS settings > Own ship data > MMSI
3. Enter the MMSI code.
NOTE:
Enter your MMSI code between 200000000
and 799999999. If you enter a code out of this
range, an error message is displayed after pushing
[ENT] in step 5.
TIP:
• Select a number using [◄] and [►].
•Push [ENT] to enter the selected number.
• Select “←” or “→” on the screen to move the cursor.
4. Repeat step 3 to enter all 9 digits.
5. Select [Finish] and push [ENT] to set the ID.
•The “MMSI CONFIRMATION” screen is displayed.
6. Enter the MMSI code again to confirm.
• When a different code is entered from the “MMSI
INPUT” screen, “MMSI does not match.” is displayed,
and returns to step 1. Enter a code again in step 1.
7. Select [Finish] and push [ENT] to set the entered
code.
•When your MMSI code is successfully entered, “MMSI
registered successfully.” is briefly displayed, and then
enters the “OWN SHIP DATA” screen. See the next
page for details.
L
The “OWN SHIP DATA” screen can also be entered
from the Menu screen. (p. 7)