40
10
SET MODES
■
Initial Set mode programming
The initial Set mode can be accessed at power ON, and
allows you to set seldom-changed settings. In this way,
you can “customize” the transceiver to suit your prefer-
ence and operating style.
D
Initial Set mode operation
q
While holding down
[
Y
]
and
[
Z
]
, hold down
[ ]
for
1 second to enter the Initial Set mode.
w
Push
[
Y
]
or
[
Z
]
to select the desired item.
e
Rotate
[VOL]
to select an option or value.
r
Push
[# ENT]
to exit the initial Set mode.
Initial Set mode items
:
:
• Key-touch beep
Turns the key-touch beep ON
(Set the beep level 1 to 3) or OFF.
Inhibit continuous transmissions
longer than the selected time period.
Automatically turns OFF
the transceiver’s power.
Turn the Lockout function ON or OFF.
Set the squelch delay to Short or Long.
Select the display type for memory
mode operation.
• Time-out timer
• Auto power OFF
• Lockout
• Squelch delay
• Dial assignment
Set the DTMF sending rate.
Select whether or not to use
[VOL]
as
the tuning control instead of
[
Y
]
and
[
Z
]
.
Select the LCD contrast.
Select the ratio of the power save time
to the standby time.
Selects whether or not to accelerate
the step speed when rotating
[VOL]
rapidly.
• DTMF speed
• Display type
• LCD contrast
• Power save
• Dial acceleration
Turns the Auto Repeater function
ON or OFF.
• Auto repeater
(For only USA version of IC-V80)
