Icom IC-M94DE страница 80 Скачать руководство пользователя

Страница: 80 / 88

SPECIFICATIONS AND OPTIONS

■

Using the HM-165

Alligator type clip

To attach the speaker microphone

to your shirt or collar.

PTT switch

Push to transmit.

Release to receive.

Microphone
Speaker

Turn OFF the transceiver

when connecting the HM-165.

NOTE:

•

NEVER

immerse the connector in water. If the connector becomes wet,

BE SURE

dry it before attaching to the transceiver.

•

The microphone element is located at the top of the speaker microphone, as shown in

the illustration above. To maximize the readability of your transmitted audio, hold the

microphone approximately 5 ~ 10 cm (2 ~ 4 inches) from your mouth, and then speak

at your normal voice level.

•

If the audio sound becomes muffled, remove any water that may be inside the speaker

grill and/or microphone hole.

•

The DSC alarms sound from the transceiver, even while the speaker microphone is attached.

Attaching the HM-165

1. Turn OFF the power.

2. Insert the speaker microphone connector into the connector and securely screw it, as

shown below.

Be careful not to cross-thread the connection.

NOTE: KEEP

the jack cover attached when the speaker microphone is not used. If the

cover is not attached, water will get into the transceiver. Moreover, the terminals (pins)

will become rusty, or the transceiver will function abnormally if the connector gets wet.

CAUTION:

Attach the speaker microphone connector securely to

prevent accidental loss, or water intrusion into the connector.

Detaching:

Rotate the jack cover counter-

clockwise, and then detach it.

Attaching:

Attach the jack cover, and then

rotate it clockwise completely.

Содержание IC-M94DE

























































































Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды

Icom IC-M94DE, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды