Icom IC-M94DE Скачать руководство пользователя

Страница: 15 / 88

PANEL DESCRIPTION

1
2

POSITION/TIME DISPLAYS

Displays the current position and time

when valid GPS data is received, or

when manually entered.

Received GPS data:

•“No Position No Time” is displayed if

no GPS data is received for 2 minutes

after turning ON the transceiver, and

then a warning message is displayed.

•“??” blinks if no GPS data is received

for 30 seconds after receiving valid

GPS data, and then “??” and a

warning message are displayed

alternately after 10 minutes.

•A warning message is displayed if no

GPS data is received for 4 hours after

receiving valid GPS data.

“Local” is displayed when the UTC

Offset time is set. (p. 65)

Manually entered GPS data:

•A manually entered GPS data is

valid for 4 hours, and then a warning

message is displayed.

“Manual” is displayed.

CHANNEL NAME

•The channel name is displayed, if

entered. (p. 18)

•“SCAN” or “SCAN 16”:

Displayed while scanning. (p. 20)

•“DUAL 16” or “TRI 16”:

Displayed while using the Dualwatch

or Tri-watch function. (p. 21)

OPERATING CHANNEL NUMBER

(p. 13)

Displays the selected operating channel

number.

STATUS INDICATOR

•STBY: Standby mode.

•RT:

Displayed while in the Radio

Telephone (RT) mode.

Returns to the Standby mode if no

operation occurs during the preset

period of time.

•DSC: Displayed while in the DSC

mode.

STATUS INDICATOR

(p. 16)

•TX:

Displayed while transmitting.

•MONI: Displayed while the Monitor

function is activated.

•BUSY: Displayed while receiving, or

the squelch is open.

■

Software Keys

Various often-used functions are assigned

to the Software Keys for easy access. The

functions’ icons are displayed above the

Software Keys, as shown below.

Selecting a Software Key

function

Push [◄] or [►] to slide through the

selectable functions that are assigned

to the Software Keys.

2. Push the Software Key under the

function’s icon to select the function.

NOTE:

The displayed icons or their order

may differ, depending on the transceiver

version or the presetting. Ask your dealer

for presetting details.

When the MMSI code is not set, the

Software Keys for the DSC function are

not displayed.

Содержание IC-M94DE

























































































Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды

Icom IC-M94DE, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды