Icom IC-M94DE страница 54 Скачать руководство пользователя

Страница: 54 / 88

AIS RECEIVER

■

Using the plotter screen

In the plotter screen, the display range and the icons of the AIS target, waypoint for

navigation and MOB are displayed. You can change the display range and type,

depending on your operating style.

1. Push

•

The plotter screen is displayed.

2. Push the Software Key below for your next operation.

(DSC)

Displays the “Compose Other” screen to send

an Individual call. (p. 28)

Displayed only when a target is selected.

May not be displayed, depending on the

selected target.

(Navigation)

Starts navigation to the selected target.

(p. 59)

(MOB)

Starts the MOB mode. (p. 58)

(Range)

Selects the display range. (p. 46)

(Target

▲)

Selects the farthest target from your vessel.

(Target

▼)

Selects the closest target to your vessel.

(Detail)

Displays the details on the selected target.

(p. 50)

Displayed only when the target is selected.

(List)

Selects the list screen that you want to

display. (p. 47)

NOTE:

An alarm sounds when an AIS target is closer than

the CPA (Closest Point of Approach) and TCPA (Time to CPA)

settings, and so on, depending on the presetting. To stop the

alarm buzzer, push any key.

If the popup screen is displayed, push any key again to turn it

OFF.

TIP

: You can display the plotter screen by selecting the

“Plotter” item on the Menu screen.

[MENU] > AIS >

Plotter

NOTE:

For the AIS receiver operation, the transceiver must be receiving valid GPS

signals, or your position must be entered. (p. 23)

Содержание IC-M94DE

























































































Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды

Icom IC-M94DE, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды