Icom IC-M94DE Скачать руководство пользователя

Страница: 17 / 88

1
2

BATTERY CHARGING

■

Battery caution

Misuse of Li-ion batteries may result in

the following hazards: smoke, fire, or

the battery may rupture. Misuse can

also cause damage to the battery or

degradation of battery performance.

DANGER! NEVER

incinerate used

battery packs. Internal battery gas may

cause an explosion.

DANGER! NEVER

strike or otherwise

impact the battery pack. Do not use

the battery pack if it has been severely

impacted or dropped, or if the pack has

been subjected to heavy pressure. Battery

pack damage may not be visible on the

outside of the case. Even if the surface of

the battery does not show cracks or any

other damage, the cells inside the battery

may rupture or catch fire.

DANGER! NEVER

leave the battery

pack in places with temperatures above

60°C (140°F). High temperature buildup

in the battery cells, such as could occur

near fires or stoves, inside a sun-heated

vehicle, or in direct sunlight for long

periods of time may cause the battery

cells to rupture or catch fire. Excessive

temperatures may also degrade the battery

pack’s performance or shorten the battery

cell’s life.

DANGER! NEVER

place battery packs

near a fire. Fire or heat may cause them

to rupture or explode. Dispose of used

battery packs in accordance with local

regulations.

DANGER! NEVER

solder the battery

terminals, or

NEVER

modify the battery

pack. This may cause heat generation, and

the battery may burst, emit smoke or catch

fire.

DANGER! NEVER

let fluid from inside

the battery get in your eyes. This can

cause blindness. Rinse your eyes with

clean water, without rubbing them, and

immediately go to a doctor.

WARNING! NEVER

let fluid from inside

the battery cells come in contact with your

body. If it does, immediately wash with

clean water.

WARNING! NEVER

put the battery

pack in a microwave oven, high-

pressure container, or in an induction

heating cooker. This could cause a fire,

overheating, or cause the battery cells to

rupture.

WARNING! NEVER

use deteriorated

battery packs. They could cause a fire.

CAUTION: DO NOT

use the battery pack

out of the specified temperature range for

the transceiver:
IC-M94D: –20°C ~ +60°C (–4°F ~ +140°F)
IC-M94DE: –15°C ~ +55°C (5°F ~ 131°F)
IC-M94DE (AUS):

–10°C ~ +55°C (14°F ~ 131°F)

and the battery itself (–20°C ~ +60°C (–4°F

~ +140°F)). Using the battery out of its

specified temperature range will reduce its

performance and battery cell’s life. Please

note that the specified temperature range

of the battery may exceed that of the

transceiver. In such cases, the transceiver

may not work properly because it is out of

its operating temperature range.

CAUTION: DO NOT

leave the battery pack

fully charged, completely discharged, or

in an excessive temperature environment

(above 50°C, 122°F) for an extended

period of time. If the battery pack must

be left unused for a long time, it must

be detached from the transceiver after

discharging. You may use the battery pack

until the remaining capacity is about half,

then keep it safely in a cool and dry place

at the following temperature range:

•Within a month

–20°C ~ +50°C (–4°F ~ +122°F)

•Within three months

–20°C ~ +40°C (–4°F ~ +104°F)

•Within a year

–20°C ~ +20°C (–4°F ~ +68°F)

Содержание IC-M94DE

























































































Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды

Icom IC-M94DE, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M94DE

Отзывы:

Похожие инструкции для IC-M94DE

Бренды по названию

Популярные бренды