background image

60

11

OTHER FUNCTIONS

11

15

18

13

16

14

12

17

1

7

4

10

2

8

5

3

9

6

Selecting in the Waypoint list:

See “Navigating to a waypoint” on page 57 for details.

Selecting on the AIS screen:

1.  Open the following screen. (pp. 45, 47)

[MENU] > AIS > 

Plotter or Target/Danger/Friend list

 

L

You can also open the plotter screen by pushing 

.

2. 

Push [▲] or [▼] to select an AIS target or waypoint.

3.  Push 

.

 •“Start navigation. Are you sure?” is displayed.

4.  Push 

 to start navigation.

 •The plotter screen is displayed, and the transceiver starts to 

navigate

.

 •

 is displayed on the plotter screen.

5.  Push the Software Key for your next operation.

 

L

See step 4 in “Using 

” on page 59.

TIP: 

You can also start navigation in the details on the AIS 

target or waypoint.

1.  Repeat steps 1 ~ 2.

2.  Push 

, [ENT], or [►].

 •The “Details” screen is displayed.

3.  Repeat steps 3 ~4.

 

D

Stopping navigation

1.  Push the Software Key below to stop navigation, depending 

on the screen.

: On the operating screen.
On the plotter screen. (p. 45)
:

On the Target/Danger/Friends/Waypoint list or 

details screen. (pp. 47, 55)

 •“Stop navigation. Are you sure?” is displayed.

2.  Push 

.

 •The transceiver stops to navigate, and then returns to the 

previous screen.

 

D

Navigation settings

Navigation settings can be customized in “Navigation” on the Menu screen.

[MENU] > Settings > 

Navigation

Arrival Alarm

 

z

Audible Alarm

You can select whether or not to sound 

an Arrival alarm when the vessel arrives 

at or near the destination.

ON:   The alarm sounds.

OFF:  The alarm does not sound.

 

z

Range

Set the range to between 0.1 and 6.0 

NM (in 0.1 NM steps) for the alarm 

function.

Содержание IC-M94DE

























































































Отзывы: