Icom IC-M402, Инструкция по эксплуатации

Страница: 39 / 50

33
10
HM-127 REMOTE-CONTROL MICROPHONE
■
Starting a scan
q
Push [CH/WX•U/I/C] several times while pushing [H/L] to
select the channel group (USA, INT, CAN), if desired.
• When the weather alert function is in use, select the desired
weather channel with [CH/WX] and [
Y
]/[
Z
].
w
Push [SCN] to start priority or normal scan.
• “SCAN” appears during normal scan.
• The priority channel readout indicates “16”, and “P” and “SCAN”
indicators appear during priority scan.
• When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to set mode set-
ting (Ch 16 is still monitored during priority scan).
• Push [
Y
]/[
Z
] to check the scanning tag channels, to change the
scanning direction or resume the scan manually.
e
To stop the scan, push [SCN].
• “SCAN” disappears.
• Pushing [PTT], [16•9] or [CH/WX] also stops the scan.
■
Setting tag channels
q
Push [CH/WX•U/I/C] several times while pushing [H/L] to
select the channel group (USA, INT, CAN), if desired.
w
Push [
Y
]/[
Z
] to select the desired channel to set as a tag
channel.
e
Push [SCN•TAG] for 1 sec. to set the displayed channel as
a tag channel.
• “ ” appears.
r
To cancel the tag channel setting, push and hold
[SCAN•TAG] for 1 sec.
• “ ” disappears.
• Clearing all tag channels in the selected channel group
➥
While pushing [
Y
] and [
Z
], Turn power ON to clear all tag
channels in the channel group.
■
Dualwatch/Tri-watch operation
q
Push [
Y
]/[
Z
] to select the desired channel.
• Push [CH/WX•U/I/C] several times while pushing [H/L] to select
the channel group (USA, INT, CAN), if desired.
w
Push [CH/WX•DW] for 1 sec. to start dualwatch or tri-
watch.
• “DUAL” appears during dualwatch; “TRI” appears during tri-
watch.
• Beep tone sounds when a signal is received on Channel 16.
• Tri-watch becomes dualwatch when receiving a signal on the call
channel.
e
To cancel dualwatch/tri-watch, push [CH/WX•DW] again.
00_IC-M402_S.qxd 02.2.21 0:08 PM Page 33 (1,1)