manualshive.com logo in svg

Icom IC-M402, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-M402 Скачать руководство пользователя страница 26

20

8

SET MODE

■

Set mode programming

Set mode is used to change the conditions of some of the
transceiver’s functions.

•

Available functions may differ depending on dealer set-
ting.

•

The optional HM-127 has it’s own settings for the beep
tone and LCD contrast. (p. 34)

q

Turn power OFF.

w

While pushing and holding [16], turn power ON to enter set
mode.

e

After the display appears, release [16].

r

Push [16] to select the desired item, if necessary.

t

Push [

Y

]/[

Z

] to select the desired condition of the item.

y

Turn power OFF, then ON again to exit set mode.

• SET MODE CONSTRUCTION

■

Set mode items

ï

ï

Scan mode

The scan mode can be se-
lected as a normal scan or
priority scan. (p. 9)

ï

ï

Scan resume timer

The scan resume timer
can be selected as a
pause (OFF) or timer scan
(ON).When OFF is se-
lected, the scan pauses
until the signal disappears.When ON is selected, the scan
pauses 5 sec. and resumes even if a signal is being received
on channels except for Channel 16.

ï

ï

Weather alert

An NOAA broadcast sta-
tion transmits a weather
alert tone before important
weather information. When
the weather alert function is turned ON, the transceiver detects
the alert, then flashes the “WX ALT” indicator until the trans-
ceiver is operated. The previously selected (used) weather
channel is checked any time during standby or while scanning.

• “ALT” appears with “WX” indication when the function is set ON.

Scan mode

Weather alert

Scan resume timer

Dual/tri watch

DSC watch

LCD contrast

Beep tone

Push

Normal scan (default)

Priority scan

Scan timer OFF (default)

Scan timer ON

Weather alert OFF (default)

Weather alert ON

00_IC-M402_S.qxd  02.2.21 0:08 PM  Page 20 (1,1)

Содержание IC-M402



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды