background image

47

4

APCO P25 MODE OPERATION

n

 Short Message

D

 Transmitting

The transceiver can send one of up to 10 different preset 
Short Messages.

[Digital Button] or [Digital Message] key assignment is 
necessary to transmit the Short Message.

Not available on Non-display types.

 For Trunking mode operation:

The Short Message can be sent only to a dispatcher in the 
Trunking mode.

q

   Push 

[Digital Button] to enter the digital call type selec-

tion mode.

 

 Quick access

  Push 

[Digital Message] to directly enter the Short Mes-

sage selection mode. In this case, skip steps 

w

 and 

e

Go to step 

r

.

w

   Push 

[CH Up] or [CH Down], or rotate [CH Up/Down] to 

select “

SHORT MSG.”

  For Handhelds: 

For Mobiles:

SHORT  MSG

DSEL          PAGE          STAT

S H O R T

M S G

e

   Push 

[Digital Button] again to enter the Short Message 

selection mode.

  • A preset Short Message is displayed.

  For Handhelds: 

For Mobiles:

SHORT  MSG

HELLO

DSEL          PAGE          STAT

S H O R T

M S G

H E L L O

r

   Push 

[CH Up] or [CH Down], or rotate [CH Up/Down] to 

select a desired Short Message.

While in the Trunking mode, the following steps 

t

 and 

y

 

are not necessary. Go to step 

u

.

t

   Push 

[Digital Button] (or [Digital Message]) again to 

enter the Individual ID selection mode.

  • A preset ID name is displayed.
  •  When the ID name is not programmed, the ID code is displayed.

  For Handhelds: 

For Mobiles:

SHORT  MSG

INDIVIDUAL1

DSEL          PAGE          STAT

S H O R T

M S G

I N D I V I D U A L 1

Содержание IC-F9011B







































































Отзывы: