![background image](http://html.mh-extra.com/html/icom/ic-f9011b/ic-f9011b_operating-manual_612680012.webp)
9
1
PREPARATION
D
APCO P25 modes operation (Continued)
SITE SELECT KEY
*
1
“SSEL” (p. 31)
(Trunking mode only)
Push to select “
SITE 1,” then push again to display the site
information (RFSS ID and SITE ID), and you can edit the
RFSS and SITE IDs.
Hold down
[Site Select] for 1 second to set, and return to
normal operation.
INDIVIDUAL KEY
*
1
“INDV” (p. 31)
Push to directly enter the Individual ID selection mode, then
select a desired Individual ID code using
[CH Up]/[CH Down]
or
[CH Up/Down].
• The Individual ID can be edited with the 10-keypad, depending on
the presetting. (10-key types only)
• While in the Individual ID selection mode, push to cancel and return
to normal operation.
TALKGROUP KEY
*
1
“TGID” (p. 33)
Push to directly enter the Talkgroup ID selection mode, then
select a desired Talkgroup ID code using
[CH Up]/[CH Down]
or
[CH Up/Down].
• While in the Talkgroup ID selection mode, push to cancel and return
to normal operation.
REKEY
*
1
“REKY”
(OTAR mode only) (p. 60)
Hold down for 1 second to transmit a Key Management
Message (KMM-Hello command) to a Key Management
Facility (KMF) to request rekeying.
KEYSET
*
1
“KSET”
(OTAR mode only) (p. 60)
➥
Push to enter the keyset selection mode, then select a
desired keyset using
[CH Up]/[CH Down] or [CH Up/
Down].
➥
During the keyset selection mode, hold down this key for 1
second to set the selected keyset, and push again to exit
the keyset selection mode.
SITE ALIAS KEY
*
2
“SALS” (p. 30)
Push to display the Site Alias.
CKR SELECT KEY
*
2
“CKR” (p. 58)
Push to enter the CKR (Common Key Reference) selection
mode. And then, push
[CH Up]/[CH Down] or [CH Up/Down]
to select a desired CKR.
TALKGROUP SCAN START/STOP KEY
*
2
“TG-S” (p. 61)
Push to start or stop Talkgroup Scan.
•
When a signal is received, the scan pauses on the channel, and the
squelch opens to monitor up to 8 trunking group
ʼ
s communication.
•
If the transceiver is out of range, this key is disabled.
*
1
Not available on Non-display types.
*
2
These functions are programmable for only transceivers whose re-
vision number is 3.0.0 or later.