![background image](http://html.mh-extra.com/html/icom/ic-f9011b/ic-f9011b_operating-manual_612680034.webp)
31
4
APCO P25 MODE OPERATION
n
Site Select function
(P25 Trunking mode only)
The RFSS and SITE IDs can be edited manually with
[Site Select].
Not available on Non-display types.
To edit the RFSS and SITE IDs:
q
Push
[Site Select] to select “SITE 1.”
w
Push
[Site Select] again to display the site information
(RFSS ID and SITE ID).
• Push
[Site Select] to return to normal operation.
e
Hold down
[Site Select] for 1 second to enter the RFSS
ID edit mode.
r
Push
[CH Up]/[CH Down] or rotate [CH Up/Down] to edit
the ID.
t
After editing, push
[Site Select] to store the RFSS ID, and
enter the SITE ID edit mode.
y
Repeat step
r
to edit.
u
Hold down
[Site Select] for 1 second to return to “SITE 1”
indication as in step
q
.
i
Hold down
[Site Select] for 1 second to store the SITE ID,
and return to normal operation.
For P25 Trunking mode operation:
The transceiver should be registered and group affiliated
with the control channel before the following operations
can be performed.
n
Individual call
D
Transmitting
Individual call allows you to make a call to a specific station,
and it provides private communication.
[Individual] key assignment is necessary to transmit the In-
dividual call.
Not available on Non-display types.
q
Push
[Individual] to enter the Individual ID selection
mode.
• “INDV” inverts to “
INDV
.” (for Handhelds)
• The key indicator appears above the key to which
[Individual] is
assigned. (for Mobiles)
• A preset ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
• Push again to cancel and return to normal operation.
For Handhelds:
For Mobiles:
I N D I V I D U A L 1
INDIVIDUAL1
INDV TGID SET
INDV