65
5
TACTICAL GROUP FUNCTION
n
Tactical Group function
D
Cloning the tactical group
<Master (Zone 128)
➔
Sub (Zone 128)> (Continued)
w
Turn the sub transceiver power ON.
e
Set the master transceiver into the set mode as follows;
For Handheld transceivers:
While pushing
[
Ω
] and [
≈
] on the master transceiver, ro-
tate
[VOL] to turn the power ON.
For Mobile transceivers:
While pushing
[P0] and [P4] on the master transceiver,
push
[
] to turn the power ON.
• “
DEALER” is displayed.
r
Input the 6 digit dealer passcode.
• The 10-keypad* can be used for passcode input.
* 10-key types only
• When using a Simple type transceiver, the keys in the table
shown below can be used for passcode input.
• The transceiver detects numbers in the same block as identical.
Therefore 0 and 5, 1 and 6, etc. are the same.
For Handheld transceivers:
KEY
[
Ω
]
[
I]
[
II]
[
III]
[
≈
]
NUMBER
0
5
1
6
2
7
3
8
4
9
For Mobile transceivers:
KEY
[
P0]
[
P1]
[
P2]
[
P3]
[
P4]
NUMBER
0
5
1
6
2
7
3
8
4
9
NOTE: When “DEALER” is still displayed after inputting 6
digits, the input code number may be wrong.
In that case, turn the power OFF, and start over.
NOTE: A default passcode is “159357”;
Push
[I], [
Ω
], [
≈
], [III], [
Ω
], [II] (Handhelds) or [P1], [P0],
[P4], [P3], [P0], [P2] (Mobiles) in sequence.
t
If “
SETMODE” is displayed after inputting the dealer pass-
code, push
[III]
(for Handhelds)
or
[P3]
(for Mobiles)
.
• “
CLONE” is displayed.
y
Push
[CH Up] or [CH Down], or rotate [CH Up/Down] to
select “
TACTICAL.”
u
Push
[PTT] (for Handhelds) or [
] (for Mobiles) to copy
zone 128 data of the master transceiver, to zone 128 of
the sub transceiver.
NOTE: If [PTT] (for Handhelds) or [
] (for Mobiles) is
pushed when “
CLONE” is displayed, the regular cloning
operation is performed (all data, including zone 128, of the
master transceiver is written to the sub transceiver).
