86
7
DV MODE PROGRAMMING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D
h52v$ESTINATIONCALLSIGN PROGRAMMING
A destination call sign must be programmed to a spe-
cific individual station or a repeater, for both digital
voice and low-speed data communications.
q
Push [DV
s
DR] to select the DV mode.
w
Push [MENU] one or more times to display the “M3”
screen (Menu 3).
s)NTHE$2MODEP
ush [MENU] once or twice to select
the “D1” screen.
e
Push [CS](F-1) to display the “CS” screen (Call
Sign).
r
Push [
Z
](F-1) one or more times to display the “UR”
screen (UR call sign setting).
t
Rotate [MAIN DIAL] to select the desired call sign
memory between “U01” and “U99.”
y
Push [EDT](F-3) to enter the call sign programming
mode.
s!CURSORAPPEARSANDBLINKS
u
Rotate [MAIN DIAL] to select the first character to
input.
When inputting numbers, push the appropriate key-
pad key.
s0USH ;$%,=& TO DELETE THE SELECTED CHARACTER OR
number.
s0USH;30#=& TOINPUTASPACE
i
Push [
Ω
](F-2) to move the cursor backwards, or
push [
≈
](F-3) to move the cursor forwards.
o
Repeat step
u
to enter UR call sign.
s!CALLSIGNOFUPTODIGITSCANBESET
!0
Push [MENU] to store the programmed call sign.
!1
Push [MENU] again to return to the “CS” screen.
For your information
The IC-9100 has a call sign edit record function.
When you edit a call sign that is stored in a call sign
memory, the edited call sign is automatically pro-
grammed into a blank channel.
If all call sign memories are already programmed, the
edited call sign will overwrite the selected channel’s
call sign.
The programmed call sign can be over-written anytime,
when the “Edit Record” item is set to OFF or Select, in
the DV Set mode. (p. 119)
However, the call sign that is stored in a regular mem-
ory or call channel must be manually overwritten.
(Temporary operation is possible).
[CS]/[
√
] [EDT]
[MENU]
[DV
・
DR]
[MAIN DIAL]
CS
C D
R > C S
U R
DSET
M3
CS U
R
CQCQCQ
M
Y
R
1
R
2
NOT USE
Ú
UR
CQCQCQ
UR
C L R
E D T
N A M E
G R P
UR
U01
D E L
S P C
