![background image](http://html.mh-extra.com/html/icom/ic-9100/ic-9100_instruction-manual_612373173.webp)
164
14
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
30%%#(,EVEL
25.
$EFAULT
!DJUSTTHESPEECHAUDIOOUTPUTLEVELTOBETWEEN
NOOUTPUT ANDMAXIMUMOUTPUT
30%%#(,ANGUAGE
26.
$EFAULT%NGLISH
Select English or Japanese as the speech language.
30%%#(3PEED
27.
$EFAULT()'(
Select HIGH (faster) or LOW (slower) speech speed.
30%%#(3,EVEL
28.
$EFAULT/.
The signal level announcement with the voice synthe-
sizer can be turned ON or OFF.
s/&&3IGNALLEVELISNOTANNOUNCED/PERATINGFRE
-
quency and mode are announced.
s/. 3IGNALLEVELOPERATINGFREQUENCYANDMODE
are announced.
SPEECH [MODE] SW
29.
$EFAULT/&&
Turn the Operating Mode Speech function ON or OFF.
When this function is ON, the selected operating mode
is verbally announced when a mode switch is pushed.
s/&&4HEOPERATINGMODE3PEECHFUNCTIONIS/&&
s/. 4HEOPERATINGMODE3PEECHFUNCTIONIS/.
[SPEECH/LOCK] SW
30.
$EFAULT30%%#(,/#+
Select the [SPEECH/LOCK] switch action.
s30%%#(,/#+0USHING THE ;30%%#(,/#+=
switch turns ON the voice synthe-
sizer function.
Holding down the [SPEECH/LOCK]
switch turns the dial lock function
ON or OFF.
s,/#+30%%#(0USHING THE ;30%%#(,/#+=
switch turns the dial lock function
ON or OFF.
Holding down the [SPEECH/LOCK]
switch turns ON the voice synthe-
sizer function.
-EMOPAD.UMBERS
31.
$EFAULT
Set the number of available memo pads to 5 or 10.
See page 144 for details.
MAIN DIAL Auto TS
32.
$EFAULT()'(
Set the Auto Tuning Step function for [MAIN DIAL].
When rapidly rotating [MAIN DIAL], the tuning step au-
tomatically changes as selected.
There are two types of auto tuning steps: LOW (Faster)
and HIGH (Fastest).
s/&& !UTOTUNINGSTEPISTURNED/&&
s,/7 !PPROXIMATELYTIMESFASTER
s()'(!PPROXIMATELYTIMESFASTERWHENTHETUNING
STEPISSETTOK(ZORSMALLERSTEPSAPPROXI
-
mately 2 times faster when the tuning step is
set to 5 kHz or larger steps.
-)#5P$OWN3PEED
33.
$EFAULT()'(
Set the rate at which frequencies are scanned while
holding down the microphone [UP]/[DN] switches.
s,/7,OWSPEEDTUNINGSTEPSSECOND
s()'((IGHSPEEDTUNINGSTEPSSECOND
1UICK2)4#LEAR
34.
$EFAULT/&&
Select the RIT/
∂
TX frequency offset clearing opera-
tion with [CLEAR].
s/&&(OLDINGDOWN;#,%!2=FORSECONDCLEARSTHE
RIT and
∂
TX frequency offset.
s/. 0USHING;#,%!2=INSTANTLYCLEARSTHE2)4AND
∂
TX frequency offset.
!&#,IMIT
35.
$EFAULT/.
Turn the AFC (Automatic Frequency Control) limit
function ON or OFF.
The AFC function automatically compensates the tun-
ing when a received frequency drifts or goes off fre-
quency.
s/&&4HE!&#FUNCTIONCONTINUESTOTUNEUNTILTHE
displayed frequency changes to reflect the
center of the signal.
s/. 4HE!&#FUNCTIONSTOPSTUNINGWHENTHEFRE
-
quency goes off the limited frequency range,
even if received frequency is off frequency.
AFC limit value:
IF Filter width
AFC limit value
15 kHz
±10 kHz
10 kHz
±7 kHz
7 kHz
±5 kHz