140
10
-%-/29/0%2!4)/.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Memory channels can be programmed in either the
VFO mode or the Memory mode.
D
0ROGRAMMINGINTHE6&/MODE
q
Push [VFO/MEMO] to select the VFO mode.
w
Set the desired settings into both VFO A and VFO
B.
±
Select the band using [BAND](MAIN/SUB).
±
Set the frequency with [MAIN DIAL] or the key-
pad. (p. 37)
±
Set the operating mode with the mode switch.
(p. 43)
±
Set other data (e.g. frequency offset, duplex di-
rection, tone squelch, split frequency operation,
etc.), if desired. (p. 138)
e
Rotate [M-CH] to select the Memory channel num-
ber to be programmed.
sh
” appears if the selected Memory channel is a
blank channel.
r
Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
s4HREEBEEPSSOUNDWHENTHE
memory programming is
complete.
D
0ROGRAMMINGINTHE-EMORYMODE
q
Push [VFO/MEMO] to select the Memory mode.
w
Rotate [M-CH] to select the Memory channel to be
programmed.
s4HECONTENTSOFTHE-EMORYCHANNELAPPEARINTHEDIS
-
play.
sh
” appears if the selected Memory channel is a
blank channel.
e
Set the desired settings into the Memory channel.
±
Set the frequency with [MAIN DIAL] or the key-
pad. (p. 37)
s7HENABLANKCHANNELISSELECTEDYOUMUSTSETTHE
desired frequency using the keypad.
±
Set the operating mode with the mode switch.
±
Set other data (e.g. frequency offset, duplex di-
rection, tone squelch, etc.), if desired.
r
Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
s4HREEBEEPSSOUNDWHENTHEMEMORYPROGRAMMINGIS
complete.
./4%
If you perform the above operations in a pre-
programmed channel, the previous channel data will
be overwritten.
N
-EMORYCHANNELPROGRAMMING
[VFO/MEMO] [MW]
[M-CH]
A G C
D U P
C O M P T B W
S C P
M1
A G C
D U P
C O M P T B W
S C P
M1
;%8!-0,%=
Programming 7.088 MHz/LSB into the Mem-
ory channel 12 while in the VFO mode.
;%8!-0,%=
Programming 21.280 MHz/USB into Memory
channel 18 while in the Memory mode.
s$URINGSETTINGTHECONTENTS
[MAIN DIAL]
Keypad
[BAND](MAIN/SUB)
Mode selection