Icom IC-80AD, Инструкция по эксплуатации

Страница: 106 / 188

98
9
MEMORY/CALL CHANNELS
[EXAMPLE]: Programming the bank name “AIR” into the
scan edge channel 3A.
N
Selecting memory/bank
name indication
During memory mode operation, either the programmed
memory name or bank name can be displayed.
q
Push [M/CALL] to select memory mode.
w
Push and hold [M.N] (6) to select display indication type
from memory name, bank name and OFF.
• While pushing and holding [M.N] (6), rotating [DIAL] is also
available. (Name indication OFF Memory Name indication
Bank name indication)
[DIAL]
Push
Bank channel is
displayed.
Name indication OFF
Memory name indication
Bank name indication
Channel
indication
disappears
NOTE: The programmed scan name is displayed during
the programmed scan selection.
During memory mode, rotate
to select scan edge channel 3A.
Push and hold
for 1 sec.
Rotate to enter “A,”
then push .
Enter select memory write mode.
* 1 S NAME can be set for scan edge channels only.
* 2 B NAME can be set for bank assigned channels only.
Push
to select “ B NAME * 2 . ”
Push and hold
for 1 sec. to program.
Enter “I” and “R”
with and .
Select “ M NAME ” or “ S
NAME * 1 ” when program-
ming the memory name or
the scan name, respectively.