background image

111

11

PRIORITY WATCH

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

N

 Priority watch types

Priority watch checks for signals on the frequency every 
5 sec. while operating on a VFO frequency or scanning (ex-
cept DR mode watch). The transceiver has 4 priority watch 
types to suit your needs.

The watch resumes according to the selected scan resume 
condition. See page 110 for details.

  

NOTE: 

If the pocket beep function is activated, the trans-

ceiver automatically selects the tone squelch function 
when priority watch starts.

D

 About priority beep function

When receiving a signal on the priority frequency, you can 
be alerted with beeps and a blink “

S

.” This function can be 

activated when setting the priority watch function ON.

MEMORY/CALL CHANNEL WATCH

While operating on a VFO fre-
quency, priority watch checks for 
a signal on the selected channel 
every 5 sec.

•  A memory channel with skip infor-

mation can be watched.

MEMORY SCAN WATCH

While operating on a VFO fre-
quency, priority watch checks 
for signals on each memory 
channel in sequence.

•  The memory skip function and/or 

memory bank scan is useful to 
speed up the scan.

VFO SCAN WATCH

While scanning in VFO mode, 
priority watch checks for signals 
on the selected channel every 
5 sec.

5 sec.

VFO

frequency

Memory

(Call)

channel

5 sec.

VFO

frequency

SKIP

Mch 0

Mch 1

Mch 2

Mch 999

5 sec.

VFO
scan

Memory

(Call)

channel

DR MODE WATCH

While operating in DR mode, 
priority watch checks for a sig-
nal on the VFO frequency every 
5 sec.

5 sec.

VFO

frequency

DR

mode

Содержание IC-80AD





























































































































































































Отзывы: