Icom IC-80AD, Инструкция по эксплуатации

Страница: 75 / 188

q
Set the desired repeater’s frequency, offset and shift direc-
tion (pgs. 23, 31), then select the DV mode (p. 25).
w
Set the current call sign to your own call sign.
• See pgs. 47, 48 for current call sign setting details.
e
Set the current station call sign and repeater call signs as
follows:
z
Push and hold [CS] (9) for 1 sec. to enter the current call
sign mode.
• UR call sign is displayed.
• Push and hold [CS] (9) for 1 sec. to toggle the call sign and
repeater name indications.
x
Push [ ] (5) to enter the current call sign selection
mode.
c
Push [ ] (2) or [ ] (8) to select the desired station call
sign, then push [ ] (5) to set the call sign for “UR.”
• Return to the current call sign mode.
v
Push [ ] (2) or [ ] (8) to select “R1,” access repeater’s
call sign, then push [ ] (5) to enter the current call sign
selection mode.
b
Push [ ] (2) or [ ] (8) to select the desired access re-
peater’s call sign, then push [ ] (5) to set the call sign
for “RPT1.”
• Return to the current call sign mode.
n
Push [ ] (2) or [ ] (8) to select “R2,” link repeater’s call sign, then
push [ ] (5) to enter the current call sign selection mode.
• “RPT2” call sign screen is displayed.
m
Push [ ] (2) or [ ] (8) to select the specified gateway
repeater call sign in the same zone, then push [ ] (5).
• Return to the current call sign mode.
,
Push [V/MHz] to return to frequency indication.
r
Push [PTT] to transmit; release to receive.
• UR call sign is displayed and scrolled in sequence on the fre-
quency display depending on “TX CS” setting (p. 135).
• Current call sign setting example
Repeater
q
： JP3YHL
Repeater
e
： JP3YHH G
Repeater
u
： JP1YIU
Gateway
Gateway
Area
Zone A
Zone B
q w e r
t y u i
UR MY
R1 R2
My call sign
：
JA3YUA
Station call sign ：
JM1ZLK
67
7
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
Calling a specific station in another zone (Different zone call)
Pushing [BAND] selects the repeater group when selection.