18-4
D
Command table (continued)
18
CONTROL COMMAND
Cmd. Sub Cmd. Data
Description
15
01
00
Read noise or S-meter squelch status
(squelch close)
01
Read noise or S-meter squelch status
(squelch open)
02
0000 to
0255
Read S-meter level
(0000=S0, 0120=S9, 0241=S9+60 dB)
05
00
Read various squelch (tone squelch, and so
on) status (squelch close)
01
Read various squelch (tone squelch, and so
on) status (squelch open)
11
0000 to
0255
Read RF power meter
(0000=0 W, 0143=100 W, 0213=200 W)
12
0000 to
0255
Read SWR meter
( 0000=SWR1.0, 0048=SWR1.5,
0080=SWR2.0, 0120=SWR3.0)
13
0000 to
0255
Read ALC meter (0000=0, 0120=Max.)
14
0000 to
0255
Read COMP meter
(0000=0 dB, 0130=15 dB, 0241=30 dB)
15
0000 to
0255
Read VD meter
(0151=44 V, 0180=48 V, 0211=52 V)
16
0000 to
0255
Read ID meter
( 0000=0 A, 0097=10 A, 0146=15 A,
0241=25 A)
16
†
02
00
Preamp OFF
01
Preamp 1 ON
02
Preamp 2 ON
12
00
AGC OFF selection
01
AGC FAST selection
02
AGC MID selection
03
AGC SLOW selection
22
00
Noise blanker OFF
01
Noise blanker ON
32
00
Audio peak filter OFF
01
Audio peak filter WIDE ON
(320 Hz is selected when SHARP APF is set)
02
Audio peak filter MID ON
(160 Hz is selected when SHARP APF is set)
03
Audio peak filter NAR ON
(80 Hz is selected when SHARP APF is set)
40
00
Noise reduction OFF
01
Noise reduction ON
41
00
Auto notch function OFF
01
Auto notch function ON
42
00
Repeater tone OFF
01
Repeater tone ON
43
00
Tone squelch OFF
01
Tone squelch ON
44
00
Speech compressor OFF
01
Speech compressor ON
45
00
Monitor function OFF
01
Monitor function ON
46
00
VOX function OFF
01
VOX function ON
47
00
BK-IN function OFF
01
Semi BK-IN function ON
02
Full BK-IN function ON
48
00
Manual notch function OFF
01
Manual notch function ON
4C
00
VSC function OFF
01
VSC function ON
4D
00
AGC VR function OFF
01
AGC VR function ON
4E
00
DIGI-SEL function OFF
01
DIGI-SEL function ON
4F
00
Twin peak filter OFF
01
Twin peak filter ON
( Can be turned ON only when Mark and Shift
are set to 2125 Hz and 170 Hz, respectively)
50
00
Dial lock function OFF
01
Dial lock function ON
*
1
In the CW mode, if the [TRANSMIT] or an external TX switch is ON, or
the Break-in function is ON, a message will be transmitted as CW code
when you send it from your PC.
*
2
The power ON command (18 01) is
usable
only when the transceiver is in
the standby mode.
Cmd. Sub Cmd. Data
Description
16
†
53
00
ANT-RX I/O setting OFF
01
ANT-RX I/O setting “A”
02
ANT-RX I/O setting “B”
55
00
15 kHz roofing filter selection
01
6 kHz roofing filter selection
02
3 kHz roofing filter selection
03
1.2 kHz roofing filter selection
56
00
SHARP selection for DSP filter type
01
SOFT selection for DSP filter type
57
00
WIDE selection for manual notch width
01
MID selection for manual notch width
02
NAR selection for manual notch width
58
00
WIDE selection for SSB transmit bandwidth
01
MID selection for SSB transmit bandwidth
02
NAR selection for SSB transmit bandwidth
5E
00
Main/Sub band tracking function OFF
01
Main/Sub band tracking function ON
17
Send CW messages*
1
18
00
Turn OFF the transceiver
01
Turn ON the transceiver*
2
19
00
Read the transceiver ID
1A
†
00
Send/read memory contents
01
Send/read band stacking register contents
02
Send/read memory keyer contents
03
00 to 49
Send/read the selected filter width
( AM: 00=200 Hz to 49=10 kHz; Other than
AM: 00=50 Hz to 31=2700 Hz/40=3600 Hz)
04
00 to 13
Send/read the selected AGC time constant
( 00=OFF, AM: 01=0.1 sec. to 13=6.0 sec.,
SSB, CW, RTTY: 01=0.3 sec. to
13=6.0/8.0 sec.)
05 0001 see
Send/read SSB RX HPF/LPF settings
0002 00 to 10
Send/read SSB RX Tone (Bass) level
(00 =–5 to 10=+5)
0003 00 to 10
Send/read SSB RX Tone (Treble) level
(00=–5 to 10=+5)
0004 see
Send/read AM RX HPF/LPF settings
0005 00 to 10
Send/read AM RX Tone (Bass) level
(00 =–5 to 10=+5)
0006 00 to 10
Send/read AM RX Tone (Treble) level
(00=–5 to 10=+5)
0007 see
Send/read FM RX HPF/LPF settings
0008 00 to 10
Send/read FM RX Tone (Bass) level
(00 =–5 to 10=+5)
0009 00 to 10
Send/read FM RX Tone (Treble) level
(00=–5 to 10=+5)
0010 see
Send/read CW RX HPF/LPF settings
0011 see
Send/read RTTY RX HPF/LPF settings
0012 see
Send/read PSK RX HPF/LPF settings
0013 00 to 10
Send/read SSB TX Tone (Bass) level
(00 =–5 to 10=+5)
0014 00 to 10
Send/read SSB TX Tone (Treble) level
(00=–5 to 10=+5)
0015 00 to 10
Send/read AM TX Tone (Bass) level
(00 =–5 to 10=+5)
0016 00 to 10
Send/read AM TX Tone (Treble) level
(00=–5 to 10=+5)
0017 00 to 10
Send/read FM TX Tone (Bass) level
(00 =–5 to 10=+5)
0018 00 to 10
Send/read FM TX Tone (Treble) level
(00=–5 to 10=+5)
0019 see
Send/read SSB TX bandwidth for wide
0020 see
Send/read SSB TX bandwidth for mid.
0021 see
Send/read SSB TX bandwidth for narrow
0022 0000 to
0255
Send/read speech level
(0000=0% to 0255=100%)
†
Send/read data