4-3
4
BASIC OPERATION
■
Power ON
Push [I/O] on the rear panel to turn ON the main
q
power.
• The transceiver power is still OFF but the [POWER] indi
-
cator lights orange.
•
When first applying power, refer to the ‘Resetting the
CPU (initial setup).’
Push [POWER] on the front panel.
w
• The transceiver’s power is ON, and the power indicator
lights blue.
• After 4 seconds, the transceiver displays the
Opening
screen
, and then displays the initial screen.
• To turn OFF the power, hold down [POWER] for 1 sec
-
ond.
• If you don’t operate the transceiver for a long period of
time, turn OFF the main power.
NOTE:
Before turning OFF the main power, make sure the
transceiver’s power is OFF and the [POWER] indica-
tor lights orange.
D
Resetting the CPU (initial setup)
Before first applying power, if a malfunction occurs, or
you want to return the transceiver to the original set-
tings, reset the transceiver using the following proce-
dure.
While holding down [F-INP] and [MW], push [POW-
➥
ER] to turn ON the power.
• The transceiver’s power is ON, and the power indicator
lights blue.
• After “ALL CLEAR” is displayed, the transceiver displays
the initial screen.
[I/O]
[POWER] indicator
[POWER]
[POWER] indicator
[POWER]
[F-INP]
[MW]
• Opening screen
• Opening screen (with opening message)
