Icom iC-7850 Скачать руководство пользователя страница 30

Страница: 30 / 282

1-14

PANEL DESCRIPTION

BAND WIDTH INDICATOR

(p. 7-5)

Displays the passband width of the IF filter.

MODE INDICATOR

Displays the selected mode.

SHIFT FREQUENCY INDICATOR

(p. 7-5)

Displays the shift frequency of the IF filter.

PASSBAND WIDTH INDICATOR

(p. 7-5)

Graphically displays the passband width for twin

PBT operation and the center frequency for IF shift
operation.

QUICK TUNING INDICATOR

(p. 4-7)

Appears when the Quick Tuning step function is ON.

BANDPASS FILTER INDICATOR

Appears when the narrow filter (500 Hz or less) is

selected in the CW, RTTY, or PSK mode.

RTTY TUNING INDICATOR

Displays the tuning level in the RTTY mode.

CLOCK READOUT

Displays the current time.

FREQUENCY READOUTS

Displays the operating frequency.

• Gray characters are used for a non-active frequency.

IF FILTER INDICATOR

Displays the selected IF filter number.

VFO/MEMORY CHANNEL INDICATOR

(p. 4-5)

Indicates the VFO mode or selected memory chan

nel number.

TX ICON

“

➥

” appears while transmitting.

Indicates the frequency used for transmit.

➥

• Displays on the Sub readout when the split function

is turned ON.

• A TX icon with doted rectangle, “

” is displayed,

instead of the regular “

” TX icon, when a fre-

quency outside of an amateur band frequency range
is selected. This function can be turned OFF in the

Others set screen, if desired. (p. 4-5)

S/RF METER

(p. 4-11)

Displays the signal strength while receiving. Dis-

plays the relative output power, SWR, ALC or com-
pression levels while transmitting.

■

Display

Содержание iC-7850



























































































































































































































































































Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды

Icom iC-7850, Инструкция по эксплуатации

Результаты поиска

Содержание iC-7850

Отзывы:

Бренды по названию

Популярные бренды