2-7
2
SET MODE ITEMS
ITEMS
DESCRIPTIONS
RANGE OR VALUE
REF.
SSB RX HPF/LPF
HPF (High-Pass Filter)/LPF (Low-Pass Fil-
ter) cut-off frequency setting for the received
audio in SSB mode.
HPF 100Hz ~ 2000Hz
LPF 500Hz ~ 2400Hz
SSB RX Tone (Bass)
RX Tone level setting
for SSB.
Bass
–5~+5 (in 1 digit steps)
SSB RX Tone (Treble)
Treble
AM RX HPF/LPF
HPF (High-Pass Filter)/LPF (Low-Pass Fil-
ter) cut-off frequency setting for the received
audio in AM mode.
HPF 100Hz ~ 2000Hz
LPF 500Hz ~ 2400Hz
AM RX Tone (Bass)
RX Tone level setting
for AM.
Bass
–5~+5 (in 1 digit steps)
AM RX Tone (Treble)
Treble
FM RX HPF/LPF
HPF (High-Pass Filter)/LPF (Low-Pass Fil-
ter) cut-off frequency setting for the received
audio in FM mode.
HPF 100Hz ~ 2000Hz
LPF 500Hz ~ 2400Hz
FM RX Tone (Bass)
RX Tone level setting
for FM.
Bass
–5~+5 (in 1 digit steps)
FM RX Tone (Treble)
Treble
CW RX HPF/LPF
HPF (High-Pass Filter)/LPF (Low-Pass Fil-
ter) cut-off frequency setting for the recep-
tion.
HPF 100Hz ~ 2000Hz
LPF 500Hz ~ 2400Hz
RTTY RX HPF/LPF
PSK RX HPF/LPF
SSB TX Tone (Bass)
TX Tone level set-
ting.
Bass
–5~+5 (in 1 digit steps)
SSB TX Tone (Treble)
Treble
AM TX Tone (Bass)
Bass
AM TX Tone (Treble)
Treble
FM TX Tone (Bass)
Bass
FM TX Tone (Treble)
Treble
SSB TBW (WIDE)
Transmission passband width setting for the
"WIDE" selection.
Lower freq. :
100, 200, 300 and 500 Hz
Higher freq. :
2500, 2700, 2800
and 2900 Hz
SSB TBW (MID)
Transmission passband width setting for the
"MID" selection.
SSB TBW (NAR)
Transmission passband width setting for the
"NAR" selection.
Speech Level
Voice synthesizer audio output level set
-
ting.
0~100% (in 1% steps)
Side Tone Level
CW side tone output level setting.
0~100% (in 1% steps)
Side Tone Level Limit
CW side tone output level limit function set-
ting.
OFF, ON
APF AF Level
Audio output level setting while APF is
used.
0~+6 dB (in 1dB steps)
Beep Level
Beep audio output level setting.
0~100% (in 1% steps)
Beep Level Limit
Sets the limit of the beep output level.
OFF, ON
Phones Level
Ratio setting for audio output level from the
headphone toward to the internal speaker.
–15~+15 (in 1 digit steps)
Phone L/R Mix
Main/Sub bands audio mix output setting to
the headphone.
OFF, ON
■
LEVEL SET
SET
[F-7]
LEVEL
[F-1]