![background image](http://html2.mh-extra.com/html/icom/ic-7610/ic-7610_basic-manual_4141367058.webp)
8
SET MODE
8-6
Connectors (Continued)
DATA1 MOD
(Default: ACC)
DATA2 MOD
(Default: USB)
DATA3 MOD
(Default: MIC, USB)
Selects the connector(s) to input the modulation signal
when the data mode is ON.
L
Touching the [DATA] key in the MODE screen
activates the data mode and does the following:
• In transmit, it locks the transmission pass bandwidth to
the default MID (300
–
2700 Hz).
•
In receive, it changes the filter selection from the SSB
filter set to the CW filter set. (However, you can still
adjust the set receive IF filter bandwidths by touching
the filter icon for 1 second.) This enables the 1/4 Tuning
function setting in the FUNCTION screen. (Disables the
Speech Compressor)
• It automatically sets the modulation input to the “MIC,”
“ACC,” “MIC, ACC,” “USB,” “MIC, USB” or “LAN”
connector(s) selected in this item, for all three data
modes.
MENU
» SET > Connectors >
USB SEND/Keying
USB SEND
(Default: OFF)
You can control transmit and receive from the PC
through the USB port.
Selects the control port to be used for communication
between the IC-7610 and PC.
L
You cannot select the terminal which is already
selected in the “USB Keying (CW)” or “USB Keying
(RTTY)” item.
USB Keying (CW)
(Default: OFF)
You can control transmit, receive and keying from the
PC, through the USB port.
Selects the control port to be used for communication
between the IC-7610 and PC.
L
You cannot select the terminal which is already
selected in the “USB SEND” or “USB Keying
(RTTY)” item.
USB Keying (RTTY)
(Default: OFF)
You can control transmit, receive and RTTY (FSK)
from the PC, through the USB port.
Selects the control port to be used for communication
between the IC-7610 and PC.
L
You cannot select the terminal which is already
selected in the “USB SEND” or “USB Keying (CW)”
item.
MENU
» SET > Connectors >
External Keypad
VOICE
(Default: OFF)
Enables voice memory transmission using an external
keypad.
KEYER
(Default: OFF)
Enables keyer memory transmission using an external
keypad.
RTTY
(Default: OFF)
Enables RTTY memory transmission using an
external keypad.
PSK
(Default: OFF)
Enables PSK memory transmission using an external
keypad.
MENU
» SET > Connectors >
Keyboard/Mouse
Keyboard [F1]-[F8] (VOICE)
(Default: OFF)
Enables the Voice TX memory transmission using a
keyboard connected to [USB].
Keyboard [F1]-[F8] (KEYER)
(Default: OFF)
Enables keyer memory transmission using a keyboard
connected to [USB].
Keyboard Type
(Default: English)
Selects the keyboard language.
Keyboard Repeat Delay
(Default: 250ms)
Sets the repeat delay time of the keyboard.
Keyboard Repeat Rate
(Default: 10.9cps)
Sets the repeat rate of the keyboard.
Mouse Pointer Speed
(Default: MID)
Selects the mouse pointer speed.
Mouse Pointer Acceleration
(Default: ON)
Turns the mouse pointer acceleration ON or OFF.
MENU
» SET > Connectors >
USB DIAL
USB DIAL Select
(Default: SUB Only)
Selects the Sub band or Main and Sub band to
operate on the RC-28’s main dial.
USB DIAL Auto TS
(Default: High)
Selects the Automatic Tuning Step for the RC-28’s
main dial.
When rapidly rotating the RC-28’s main dial, the
tuning step is automatically changed according to the
rotation speed.
USB DIAL [TRANSMIT] Switch
(Default: Push to toggle)
Selects whether to toggle between transmit and
receive by pushing, or to transmit only while holding
the [TRANSMIT] key on the RC-28.
Содержание IC-7610
Страница 1: ...BASIC MANUAL i7610 HF 50 MHz TRANSCEIVER...