![background image](http://html2.mh-extra.com/html/icom/ic-7610/ic-7610_basic-manual_4141367029.webp)
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-8
Meter display (Continued)
D
Displaying the Multi-function meter
You can simultaneously display all the parameters.
L
The TEMP meter is also displayed on the Multi-function
meter.
z
Touch the meter for 1 second to display the
Multi-function meter.
L
To close the Multi-function meter, touch the meter for 1
second again.
z
While the Multi-function meter is displayed, touch
[P-HOLD] to turn ON the Peak Level Hold function.
•
“P-HOLD” is displayed on the Multi-function meter
window title.
L
To turn OFF, push
EXIT
.
Displayed when Peak Hold function is ON.
Adjusting the transmit output power
Before transmitting, monitor your selected operating frequency to make sure you do not cause interference to other stations on
the same frequency. It is good amateur practice to listen first, and then, even if nothing is heard, ask if the frequency is in use
once or twice, before you start operating.
D
Adjusting the transmit output power
1. Set the operating mode to SSB, CW, RTTY, PSK
or FM. (p. 3-3)
2. Touch the meter several times to display the Po
meter.
•
is displayed.
3. Push
MULTI
to open the Multi-function menu.
4. Hold down [PTT] (or push
TRANSMIT
).
•
The Po meter level changes according to your voice
level in the SSB mode.
•
The TX/RX indicator lights red and
is displayed.
5. Touch “RF POWER.”
6. Rotate
MULTI
to adjust the transmit output power
to between 0 and 100%.
•
The Po meter displays the RF output power in a
percentage. It becomes the S-meter while receiving.
7. Release [PTT] (or push
TRANSMIT
again).
•
Returns to receive.
L
Tune the antenna before you view the power meter
level on the meter. If the antenna is not tuned properly,
the meter will not reflect the power level.
Содержание IC-7610
Страница 1: ...BASIC MANUAL i7610 HF 50 MHz TRANSCEIVER...