![background image](http://html2.mh-extra.com/html/icom/ic-7610/ic-7610_basic-manual_4141367054.webp)
8
SET MODE
8-2
Tone Control
MENU
» SET > Tone Control > RX >
SSB
RX HPF/LPF
(Default: – – – – – – – – –)
Sets the cut-off frequencies for the receive audio high-
pass filter and low-pass filter in 100 Hz steps, in the
SSB mode.
L
If this item is set, the “RX Bass” and “RX Treble”
items are automatically set to “0.”
RX Bass
(Default: 0)
RX Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
MENU
» SET > Tone Control > RX >
AM
RX HPF/LPF
(Default: – – – – – – – – –)
Sets the cut-off frequencies for the receive audio high-
pass filter or low-pass filter in 100 Hz steps, in the AM
mode.
Selectable ranges:
L
If this item is set, the “RX Bass” and “RX Treble”
items are automatically set to “0.”
RX Bass
(Default: 0)
RX Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
MENU
» SET > Tone Control > RX >
FM
RX HPF/LPF
(Default: – – – – – – – – –)
Sets the cut-off frequencies for the receive audio high-
pass filter or low-pass filter in 100 Hz steps, in the FM
mode.
L
If this item is set, the “RX Bass” and “RX Treble”
items are automatically set to “0.”
FM RX Bass
(Default: 0)
FM RX Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
MENU
» SET > Tone Control > RX >
CW
MENU
» SET > Tone Control > RX >
RTTY
MENU
» SET > Tone Control > RX >
PSK
RX HPF/LPF
(Default: – – – – – – – – –)
Sets the cut-off frequencies for the receive audio high-
pass filter or low-pass filter in 100 Hz steps in the CW,
RTTY, and PSK modes.
MENU
» SET > Tone Control > TX >
SSB
TX Bass
(Default: 0)
TX Treble
(Default: 0)
Sets the bass or treble level of the transmit audio.
TBW (WIDE)
(Default: 100 – 2900)
TBW (MID)
(Default: 300 – 2700)
TBW (NAR)
(Default: 500 – 2500)
Sets the transmission pass bandwidth to wide, mid,
or narrow, by changing the lower and higher cut-off
frequencies.
MENU
» SET > Tone Control > TX >
AM
TX Bass
(Default: 0)
TX Treble
(Default: 0)
Sets the bass or treble level of the transmit audio.
MENU
» SET > Tone Control > TX >
FM
TX Bass
(Default: 0)
TX Treble
(Default: 0)
Sets the bass or treble level of the transmit audio.
Function
MENU
» SET >
Function
Beep Level
(Default: 50%)
Sets the beep output level.
L
If the “Beep (Confirmation)” item is set to “OFF,” no
beeps sound.
Beep Level Limit
(Default: ON)
Selects whether or not to limit the volume up to the
specified level.
Beep (Confirmation)
(Default: ON)
Turns the Confirmation beep ON or OFF.
L
If the “Beep Level” item is set to “0%,” no beep sounds.
Band Edge Beep
(Default: ON (Default))
Turns the Band Edge beep ON or OFF.
Information
L
•
If the “Beep Level” item is set to “0%,” no beep sounds.
•
When you tune into an amateur band’s frequency
range, the high Band Edge beep sounds.
•
When you tune out of an amateur band’s frequency
range, the low Band Edge beep sounds.
Содержание IC-7610
Страница 1: ...BASIC MANUAL i7610 HF 50 MHz TRANSCEIVER...