Icom IC-7610 Скачать руководство пользователя страница 24

Страница: 24 / 80

BASIC OPERATION

3-3

Selecting the operating mode

You can select the SSB, CW, RTTY, PSK, AM, or FM

modes.

1. Touch the mode icon.

Mode key

Operating mode

[SSB]

LSB

USB

[CW]

CW-R

[RTTY]

RTTY

RTTY-R

[PSK]

PSK

PSK-R

[AM]

[FM]

[DATA]

LSB

LSB-D

USB

USB-D

AM-D

FM-D

Selecting the Data mode

You can operate in the data mode in the SSB, AM and

FM modes. The Data mode enables you to operate

these modes without input from the microphone, even

if the microphone is connected.

When the data mode is selected, you can select the

connector(s) modulation signal. (p. 8-6)

MENU

SET > Connectors >

DATA1 MOD ~ DATA3 MOD

(Example: USB-D mode)

1. While the USB mode is selected, touch the mode

icon.

2. Touch [DATA].

•

[USB-D1] is displayed.

2. Touch the mode key.

In the SSB, AM or FM mode,

the [DATA] key is displayed.

•

Operating mode selection list

Selecting the operating band

Selecting the operating band on the

keypad

(Example: Selecting 14 MHz in the Main band.)

1. Touch the Main band’s frequency readout.

2. Push

on the band keypad.

Selecting the operating band on the

screen

(Example: Selecting 21 MHz in the Main band.)

1. Touch the MHz digits to display the BAND

STACKING REGISTER screen.

2. Touch [21].

About the Band Stacking Register:

The band stacking register provides 3 memories for

each band key to store frequencies and operating

modes.

Sequentially select the registered memories:

Repeatedly push a band key on the keypad.

Repeatedly touching a band key on the BAND

STACKING REGISTER screen for 1 second.

Keypad

•

The 14 MHz band frequency is displayed.

TIP

: See the

Advanced Manual

for details on using

the Data mode.

Содержание IC-7610

















































































Результаты поиска

Содержание IC-7610

Отзывы:

Icom IC-7610, Основное руководство, Страница: 24 / 80

Результаты поиска

Содержание IC-7610

Отзывы: