Icom IC-7610, Основное руководство, Страница: 11 / 80

1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1-2
@7 @8 @9
@2
@3
@4
#1
#3
#4
#2
#5
#7
#8
#0
#6
#9
@6
@5
$0
@2
MULTI-FUNCTION CONTROL
MULTI
(p. 1-6)
Displays the Multi-function menu for various
adjustments, or selects an item.
@3
SPLIT KEY
SPLIT
(p. 4-9)
Turns the Split function ON or OFF.
@4
DUALWATCH KEY
DUAL-W
(p. 3-2)
Turns the Dualwatch function ON or OFF.
@5
GENERAL COVERAGE BAND KEY
GENE
Selects the general coverage band.
@6
TRANSMIT FREQUENCY CHECK KEY
XFC
(p. 4-1, 4-9, 4-10)
Enables you to monitor the transmit frequency while
holding it down in the Split mode.
@7
TENSION ADJUSTER
Adjusts the friction of
MAIN DIAL
.
@8
MAIN DIAL
MAIN DIAL
(p. 3-4)
Changes the operating frequency.
Front panel (Continued)
@9
SPEECH/LOCK KEY
SPEECH
• Announces the operating frequency and mode by
pushing this key.
• Electronically locks
MAIN DIAL
by holding down
this key for 1 second.
#0
MAIN/SUB CHANGE KEY
CHANGE
(p. 3-2)
Toggles the frequency, mode and selected memory
channel between the Main and Sub band.
#1
RIT/ TX CONTROL
RIT/ TX
(p. 4-1)
Shifts the receive or transmit frequency up to
±9.99 kHz without changing the transmit or receive
frequency.
#2
TX KEY
TX
Turns the TX function ON or OFF.
#3
CLEAR KEY
CLEAR
Clears the RIT or TX shift frequency.
#4
RIT KEY
RIT
(p. 4-1)
Turns the Receiver Incremental Tuning (RIT)
function ON or OFF.
#5
KEY SPEED
KEY
SPEED
PITCH
CONTROL (p. 4-11)
Adjusts the internal electronic CW keyer speed.
CW PITCH
KEY
SPEED
PITCH
CONTROL (p. 4-10)
Shifts the received CW audio pitch and the CW
side tone pitch without changing the operating
frequency.
#6
MAIN/SUB ACCESS KEY
MAIN/SUB
(p. 3-2)
Selects the Main or Sub band frequency readout.
• The selected band’s frequency is displayed clearly
whereas the non-selected band’s frequency is
displayed in gray.
#7
AUDIO PEAK FILTER/
TWIN PEAK FILTER KEY
APF/TPF
(p. 4-12)
In the CW mode, turns the Audio Peak Filter ON or
OFF, and in the RTTY mode, turns the Twin Peak
Filter ON or OFF.
#8
FILTER KEY
FILTER
(p. 4-4)
Selects one of three IF filters.
#9
TWIN PASSBAND TUNING CONTROL
TWIN PBT
CLR
(p. 4-3)
Adjusts the IF filter’s passband width.
$0
KEYPAD
1.8
~
50
Selects the operating band by pushing once, or call
up other stacked frequencies by pushing the same
key several times.
!9
EXIT KEY
EXIT
Exits a setting screen or returns to the previous
screen.
@0
VOICE MEMORY RECORD KEY
REC
Saves the previously received signal for the preset
time period set in REC Time, using the Instant
Replay function, or starts recording a QSO audio
onto an SD card.
@1
VOICE MEMORY PLAY BACK KEY
PLAY
Plays back the last 5 seconds of the Instant Replay
memory, or all of the Instant Replay memory.