13
USING AN SD CARD
13-6
Memory channels, Set mode item settings, and repeat-
er lists can be saved on the SD card.
Saving data settings on the SD card allows you to eas-
ily restore the transceiver to its previous settings, even
if an All reset is performed.
For your information
✓
Data settings are saved in the “icf” file format that is
used in the CS-7100 cloning software.
The saved data on the SD card can be copied onto a
PC and edited by the cloning software.
Data settings can be saved as a new file or to overwrite
an older file.
Saved as a new file
Push
q
SET
(
C
) to enter the Set mode.
Touch the “Save Setting” item of the “SD Card” Set
w
mode.
(SD Card >
Save Setting
)
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page.
Touch “<<New File>>.”
e
• The “FILE NAME” screen appears.
• The file name is automatically named in the following
manner; Setyyyymmdd_xx (yyyy: Year, mm: month, dd:
day, xx: serial number)
Example:
If a second file is saved on March 1, 2013, the
file is named “Set20130301_02.”
• If you want to change the file name, see “Save with a dif
-
ferent file name” (p. 13-7).
Touch [ENT](
r
D
) to save the file name.
• The confirmation screen “Save file?” appears.
Touch [YES](
t
D
) to save.
• While saving, a progress bar is displayed, then the “SD
CARD” screen is displayed after the save is completed.
Push
y
SET
(
C
) to exit the Set mode.
Saving the setting data onto an SD card
●
w
q
q
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Overwriting a file
(
Example:
Overwriting the “Set20130301_01”)
Select the desired file to be overwritten in step
➥
e
as
described above.
(
Example:
Selecting “Set20130301_01”)
Previous view
