Icom IC-7100 Скачать руководство пользователя страница 77

Страница: 77 / 375

RECEIVE AND TRANSMIT

4-15

The functions for RTTY operation (Continued)

RTTY decoder

The transceiver has an RTTY decoder for Baudot (mark
frequency: 2125 Hz, shift frequency: 170 Hz, 45 bps).

An external terminal unit (TU) or terminal node con-
nector (TNC) is not necessary for receiving a Baudot
signal.

In the RTTY mode, push

(

) one or more

times to select the “M-2” screen (Menu M-2).
Touch [DEC](

) to display the RTTY decoder

screen.

• Touch [WIDE](

) to toggle the decode screen size be-

tween normal and wide.

Touch [HOLD](

) to turn ON the Hold function to

hold the current screen.

• “

” appears when this function is turned ON.

• Touch [HOLD](

) again to turn OFF the Hold function.

Touch [CLR](

) for 1 second to clear the displayed

characters.

• “

” disappears at the same time as the displayed char-

acters are cleared. (The hold function is cancelled.)

Push

(

) to return to the “M-2” screen (Menu

M-2).

• Setting the decoder threshold level

If some characters are displayed when no signal is re-

ceived, adjust the RTTY decoder threshold level.

In the RTTY mode, push

(

) one or more

times to select the “M-2” screen (Menu M-2).
Touch [DEC](

) to display the RTTY decoder

screen.

• Touch [WIDE](

) to toggle the decode screen size be-

tween normal and wide.

Touch [<1>](

) to display the RTTY decoder (2)

screen.

• Touch [<1>] or [<2>](

) to toggle between the RTTY de-

coder and the RTTY decode (2) screens.

Touch [ADJ](

) to select the threshold level adjust

ment mode.

Rotate the Dial to adjust the RTTY decoder thresh

old level.

• Touch [DEF](

) for 1 second to reset to the default set-

ting, if desired.

Push

(

) to exit the adjustment mode.

The number of the decoder display lines, the UnShift
On Space (USOS) function and new line code can
be set in the RTTY Set mode. (p. 4-16)

The

in the instructions indicate the

part of the controller.

: Left side,

: Right side,

: Center bottom

: Display (Touch screen)

Hold function
ON/OFF

Clear the character

Appears when the Hold function

is turned ON.

Touch [DEC]

Touch [ADJ]

Touch for 1 second to reset
the threshold level to default.

Threshold level display

Previous view

Содержание IC-7100
























































































































































































































































































































































































Результаты поиска

Содержание IC-7100

Отзывы:

Icom IC-7100, Расширенные инструкции, Страница: 77 / 375

Результаты поиска

Содержание IC-7100

Отзывы: