manualshive.com logo in svg

Icom IC-7100, Расширенные инструкции

Поделиться
Скачать
Icom IC-7100 Скачать руководство пользователя страница 317

17

SET MODE

17-14

DV Auto Detect 

(Default: OFF)

DV Set > DV Auto Detect (DV Auto Detect)

Turn  the  DV  mode  automatic  detect  function  ON  or 
OFF.
If you receive a non-digital signal during DV mode op-
eration, this function automatically switches to the FM 
mode.

• OFF:  Turns the function OFF. The operating mode is 

fixed to the DV mode. 

• ON:   Automatically  selects  the  FM  mode  for  tempo

-

rary operation.

RX Record (RPT) 

(Default: ALL)

DV Set > RX Record (RPT) (RX Record (RPT))

The  transceiver  can  record  the  data  of  up  to  50  indi-
vidual calls.
When  the  received  signal  includes  a  status  message 

(“UR?”  or  “RPT?”)  that  is  sent  back  from  the  access 

repeater, you can record up to 50 messages or only the 
latest one, in the Received Call Record.

• ALL: 

 Records up to 50 calls.

• Latest Only:  Records only the latest call.

BK  

(Default: OFF)

DV Set > BK (BK)

The BK (Break-in) function allows you to break into a 
conversation, where the two other stations are commu-
nicating with call sign squelch enabled.

• OFF:  Turns the function OFF.
• ON:   Turns the function ON.

 

“BK” appears on the display.

 NOTE: 

The BK function is automatically turned OFF 

when transceiver is turned OFF.

EMR 

(Default: OFF)

DV Set > EMR (EMR)

The  EMR  (Enhanced  Monitor  Request)  communica-
tion mode can be used in the digital mode. In the EMR 
mode, no call sign setting is necessary.
When  an  EMR  mode  signal  is  received,  the  audio 
(voice) will be heard at the specified level even if the 
volume setting level is set to minimum level, or digital 
call sign/digital code squelch is in use.

• OFF:  Turns the function OFF.
• ON:   Turns the function ON.

 

“EMR” appears on the display.

NOTE: 

The  EMR  function  is  automatically  turned 

OFF when transceiver is turned OFF.

EMR AF Level 

(Default: 50%)

DV Set > EMR AF Level (EMR AF Level)

Set the audio output level to between 0% (no audio), 
1% (minimum) and 100% (maximum) for when an EMR 

communication mode signal is received.
When  an  EMR  signal  is  received,  the  audio  will  be 
heard at the set level, or the [AF] control level, which-
ever is higher.

To disable the setting, set it to “0%.”

NOTE: 

After  an  EMR  signal  disappears,  the  audio 

level will remain at the EMR level. In this case, rotate 

[AF] to adjust the audio level.

DV Set mode (Continued)

Previous view

Содержание IC-7100
























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды