Icom IC-7100, Расширенные инструкции, Страница: 345 / 375

19
MAINTENANCE
19-6
Data cloning (Continued)
D Cloning using a cloning software
The optional CS-7100
cloning software
is also avail-
able to clone/edit contents with a PC using ICF format
files.
The programmed data can be write to the transceiver
using an SD card or a PC.
This section describes how to write the programmed
data to the transceiver using an SD card.
If you want to write the programmed data into the trans-
ceiver using a PC, see the CS-7100 instruction manual
for details.
Save the IC-7100’s setting data onto an SD card. (p.
q
13-6)
(
SET
(
C
) > SD Card >
Save Setting
)
Start-up the Windows that the CS-7100 is installed.
w
Insert the SD card in the PC.
e
• Insert the SD card into the SD card slot of the PC or the
SD card reader.
Double-click the CS-7100 shortcut icon on the desk-
r
top to start the software.
• After starting up, “Initial Setup” appears the first time.
• To make the initial setup using the saved data on the
card, follow the steps as described in “Initial setup using
an SD card.” (p. 19-7)
Click “
t
” on the tool bar, or “Open...” in the File
menu to show the data file selection screen. Select
the ICF file, saved in step
q
, as described above.
Set the desired settings in the CS-7100.
y
• Please refer to the Help file of the cloning software for
assistance with the functions or settings.
Click “
u
” on the tool bar, or “Save As...” in the File
menu to save the settings in an “icf” file format in a
[Setting] folder on the card.
Insert the SD card that includes the ICF file into the
i
slot of the transceiver.
Load the file to complete the cloning.
o
(
SET
(
C
) > SD Card >
Load Setting
)
Open
Save
Click
Previous view