Icom IC-2200H Скачать руководство пользователя

Страница: 63 / 108

POCKET BEEP AND TONE SQUELCH

■

Tone/DTCS squelch operation

The tone or DTCS squelch opens only when receiving a sig-
nal with the same pre-programmed subaudible tone or DTCS
code, respectively.

Set the operating frequency.

Program the CTCSS tone frequency or DTCS code in set
mode.

• See p. 48 for programming details.

Push

[TONE

]

several times until “ ” or “ ” ap-

pears in the function display.

• “

” for tone squelch; “

” for DTCS squelch operation.

When a signal with the matched tone is received, the
squelch opens and the signal can be heard.

• When the received signal includes an unmatched tone, the

squelch does not open. However, the S/RF indicator shows the
received signal strength.

• To open the squelch manually, push

[MONI

]

Operate the transceiver in the normal way (push

[PTT]

transmit; release

[PTT]

to receive).

To cancel the tone squelch, push

[TONE

]

sev-

eral times until “ ” or “ ” disappears.

Set the operating frequency.

Program the CTCSS tone frequency or DTCS
code in set mode.

• See p. 49 for programming details.

Push

[FUNC]

then

[

SIMP

9(TSQL)]

[

HIGH

4(DTCS)]

to turn the tone squelch or DTCS

squelch ON.

When a signal with the matched tone is received,
the squelch opens and the signal can be heard.

• When the received signal includes an unmatched

tone, the squelch does not open. However, the S/RF
indicator shows the received signal strength.

• To open the squelch manually, push

[

MONI

1(ANM)]

Operate the transceiver in the normal way (push

[PTT]

to transmit; release

[PTT]

to receive.

To cancel the tone squelch, push

[FUNC]

then

[

ENT

C(T-OFF)]

• “

” or “

” disappears

TSQL

DTCS

T-SCAN

ANM

T-SCAN

Содержание IC-2200H













































































































Результаты поиска

Содержание IC-2200H

Отзывы:

Похожие инструкции для IC-2200H

Бренды по названию

Популярные бренды

Icom IC-2200H, Инструкция по эксплуатации

Результаты поиска

Содержание IC-2200H

Отзывы:

Похожие инструкции для IC-2200H

Бренды по названию

Популярные бренды