Icom IC-2200H Скачать руководство пользователя

Страница: 59 / 108

DTMF MEMORY ENCODER

■

Transmitting a DTMF code

Automatic transmission (DTMF memory)

Push

[FUNC]

then

[

LOW

6(DTMF)]

to turn the

DTMF memory encoder ON.

• “d” appears in place of the 100 MHz digit.

Push

[BANK/OPTION]

for 1 sec. then

[

SET

B(D-OFF)]

to enter the DTMF memory pro-

gramming condition.

Push

[

]

[

]

to select the desired channel.

Push

[PTT]

to transmit the selected memory.

• Exit the programming condition automatically.
• Each push of

[PTT]

transmits the DTMF code.

Push

[FUNC]

then

[

SET

B(D-OFF)]

to cancel the

DTMF memory encoder.

• When the DTMF encoder is turned ON continuously,

each push of the PTT transmits the previously se-
lected DTMF code.

Transmitting a DTMF memory directly

Push

[FUNC]

then

[

LOW

6(DTMF)]

to turn the

DTMF memory encoder ON.

• “d” appears in place of the 100 MHz digit.

Push

[DTMF-S]

to turn the DTMF memory di-

rect selection ON.

• The function indicator (microphone) lights green.

Push the desired DTMF channel number.

• “0” to “9” are available for channel numbers.
• The selected DTMF code is automatically transmit-

ted without pushing PTT.

Transmitting a DTMF memory directly

— continued

NOTE:

When no DTMF code programmed chan-

nel number is pushed, it transmits previously
transmitted DTMF memory code.

Push

[DTMF-S]

again to deactivate the DTMF

memory direct selection.

Push

[FUNC]

then

[

SET

B(D-OFF)]

to cancel

the DTMF memory encoder.

Manual transmission

Deactivate the DTMF memory encoder by
pushing

[FUNC]

then

[

SET

B(D-OFF)]

Push

[DTMF-S]

to turn the DTMF direct selec-

tion ON.

• The function indicator (microphone) lights green.

Push one of “A” to “F” keys momentarily, then
push the desired DTMF keys, 0–9 and A to F.

• A:

[

CLR

A(MW)]

[

SET

B(D-OFF)]

[

ENT

C(T-OFF)]

[

SQL

D(MUTE)]

[

(TONE-1)]

[

SQL

#(16KEY-L)]

• Automatically transmits without pushing PTT.
• The first code, one of “A” to “F,” is not transmitted.

DTMF code transmission starts from the 2nd code.

Push

[DTMF-S]

again to deactivate the DTMF

direct selection.

DTMF-S

DTMF

Содержание IC-2200H













































































































Результаты поиска

Содержание IC-2200H

Отзывы:

Похожие инструкции для IC-2200H

Бренды по названию

Популярные бренды

Icom IC-2200H, Инструкция по эксплуатации

Результаты поиска

Содержание IC-2200H

Отзывы:

Похожие инструкции для IC-2200H

Бренды по названию

Популярные бренды