Icom IC-2200H Скачать руководство пользователя страница 19

Страница: 19 / 108

PANEL DESCRIPTION

■

Microphone

(HM-133V*)

VFO/LOCK KEY [VFO/LOCK]

➥

Push to select VFO mode. (p. 9)

➥

Push for 1 sec. to switch the lock function ON and OFF.
(p. 12)

PTT SWITCH

➥

Push and hold to transmit; release to receive.

➥

Switches between transmitting and receiving while the
one-touch PTT function is in use. (p. 16)

UP/DOWN KEYS [

]/[

]

➥

Push either key to change operating frequency, mem-
ory channel, set mode setting, etc. (pgs. 10, 24)

➥

Push either key for 1 sec. to start scanning. (p. 38)

ACTIVITY INDICATOR

➥

Lights red while any key, except

[FUNC]

and

[DTMF-S]

is pushed, or while transmitting.

➥

Lights orange while the microphone keypad lock func-
tion is activated.

➥

Lights green while the one-touch PTT function is in use.

KEYPAD

(pgs. 7, 8)

FUNCTION INDICATOR

➥

Lights orange while

[FUNC]

is activated—indicates the

secondary function of keys can be accessed.

➥

Lights green when

[DTMF-S]

is activated—DTMF sig-

nals can be transmitted with the keypad.

FUNCTION KEY [FUNC]

(pgs. 7, 8)

DTMF MEMORY SELECT KEY [DTMF-S]

(p. 46)

FUNCTION KEYS [F-1]/[F-2]

(p. 84)

Program and re-call your desired transceiver conditions.

BANK/OPTION KEY [BANK/OPTION]

➥

Push to selects memory bank condition during memory
mode. (p. 32)

➥

Push for 1 sec. to enter the DTMF or option set mode.

MEMORY/CALL KEY [MR/CALL]

➥

Push to select memory mode. (p. 24)

➥

Push for 1 sec. to select call channel. (p. 35)

Mic element

*A different microphone

may be supplied de-
pending on version.

Содержание IC-2200H













































































































Результаты поиска

Содержание IC-2200H

Отзывы:

Icom IC-2200H, Инструкция по эксплуатации, Страница: 19 / 108

Результаты поиска

Содержание IC-2200H

Отзывы: