Icom IC-2200H Скачать руководство пользователя

Страница: 33 / 108

REPEATER OPERATION

DTMF tones

➥

Push

[DTMF-S]

, then push the keys of the de-

sired DTMF digits.

• The function indicator lights green.
• 0–9, A–D,

(E) and #(F) are available.

• When “d” is displayed in place of the 100 MHz digit,

cancel the DTMF memory encoder in advance.
(p. 46)

• Push

[DTMF-S]

again to return the keypad to nor-

mal function control.

• The transceiver has 10 DTMF memory channels

for autopatch operation. See p. 45 for details.

1750 Hz tone

The microphone has 1750 Hz tone capability, used for ring
tone when calling, etc.

Push

[FUNC]

• The function indicator lights orange.

Push

[

(TONE-1)]

to transmit a 1750 Hz tone

call signal for 0.5 sec.; push and hold

[0(TONE-2)]

to transmit a 1750 Hz tone call

signal for an arbitrary period.

• The function indicator goes out automatically.

Push ,

then or .

TONE-1

TONE-2

then push desired keys.

Push ,

DTMF-S

Содержание IC-2200H













































































































Результаты поиска

Содержание IC-2200H

Отзывы:

Похожие инструкции для IC-2200H

Бренды по названию

Популярные бренды

Icom IC-2200H, Инструкция по эксплуатации

Результаты поиска

Содержание IC-2200H

Отзывы:

Похожие инструкции для IC-2200H

Бренды по названию

Популярные бренды