Icom D-STAR ID-4100A Скачать руководство пользователя страница 111

Страница: 111 / 273

GPS OPERATION

5-28

Add a GPS memory (Continued)

3. Entering the GPS Memory date

1. Select “DATE,” then push [

•Enters the date entry mode.

2. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

3. Rotate [DIAL] to enter the date.

• Range: Set to between 2000/01/02 and

2099/12/30.

4. Repeat steps 2 and 3 to enter the date.

5. After entering, push [

4. Entering the GPS Memory time

1. Select “TIME,” then push [

•Enters the time entry mode.

2. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

3. Rotate [DIAL] to enter the time.

• Range: Set to between 00:00:00 and 23:59:59.

4. Repeat steps 2 and 3 to enter the time.

5. After entering, push [

5. Entering the GPS Memory latitude

1. Select “LATITUDE,” then push [

•Displays the LATITUDE screen.

2. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

3. Rotate [DIAL] to enter the latitude.

• Range: Set to between 0°00.00' to 90°00.00'.

You can change the unit to “ddd°mm'ss".” (p. 9-64)

To enter a north latitude, select “N,” and to enter a

south latitude, select “S.”

4. Repeat steps 2 and 3 to enter the latitude.

5. After entering, push [

6. Entering the GPS Memory longitude

1. Select “LONGITUDE,” then push [

•Displays the LONGITUDE screen.

2. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

3. Rotate [DIAL] to enter the longitude.

• Range: Set to between 0°00.00' to 180°00.00'.

You can change the unit to “ddd°mm'ss".” (p. 9-64)

To enter an east longitude, select “E,” and to enter a

west longitude, select “W.”

4. Repeat steps 2 and 3 to enter the longitude.

5. After entering, push [

7. Entering the GPS Memory altitude

1. Select “ALTITUDE,” then push [

•Displays the ALTITUDE screen.

2. Rotate [DIAL] to select between plus and minus.

3. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

4. Rotate [DIAL] to enter the altitude.

• Range: Set to between –32808 and +32808 feet.

5. Repeat steps 3 and 4 to enter the altitude.

6. After entering, push [

8. Selecting the GPS memory group

1. Select “GROUP,” then push [

2. Select the group between (No Group) and A ~ Z.

A total of up to 300 memories can be saved.

Adding or editing GPS memory

☞

Continued on the next page

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды