ICI Caldaie GREENOx BT COND 180, Техническое руководство

Страница: 6 / 32

6
3 GENERAL WARNINGS
Each generator is provided with a
manufacture plate
that can be found in the envelope with the boiler
documents. The plate lists:

Serial number or identification code;

Rated thermal output in kcal/h and in kW;

Furnace thermal output in kcal/h and in kW;

Types of fuels that can be used;

Max operating pressure.
A
manufacture certificate
is also provided which certifies the hydraulic test positive performance.
The installation must be performed in compliance with the regulations in force by
professionally qualified
personnel
. The term “professionally qualified personnel” means persons with specific technical skills in the
sector of heating system components. Incorrect installation may cause damage to persons, animals or ob-
jects for which the manufacturer cannot be held responsible.
At the first start up
, all regulation and control devices positioned on the control panel should be checked for
efficiency.
The
guarantee
shall be valid only upon compliance with the instruction given in this manual.
Our boilers have been built and tested in observance of EEC requirements and, as a consequence, CE-
marked. EEC directives are as follows:

Directive on Gas
2009/142/CE (Rif. EN 303)

Directive on Output
92/42/EEC

Directive on Electromagnetic Compatibility
2014/30/UE

Directive on Low Voltage
2014/35/UE
IMPORTANT:
This boiler has been designed to heat hot water at a temperature less than the boiling tem-
perature at atmospheric pressure and must be connected to a heating plant and/or a domestic hot water
plant within the limits of its performance and output.