308DUO V1.1.0
Synchronous Balance Charger/Discharger
- 30 -
Calibration
Select
SYSTEM MENU
→
Charger Setup
→
Calibration
to enter the setup interface.
User Calibration
may result in large
data deviation, affecting normal use; so
User Calibration
is not suggested.
If the user select
User Calibration
, the
User Calibration
option changes to active status; then select channel to enter the
interface to calibrate.
Note: User Calibration has
CH-X Channel Calibration
and
Other Variables Calibration
two options, the
user can calibrate charger for one channel alternatively. If the user selects
User Calibration
, the
corresponding
message will appear in the interface after booting the charger, as shown in the
right picture above.
Select
CH-1/2 Channel Calibration
to enter the channel calibration interface, Select
Other Variables Calibration
to enter
the other variable calibration; after Calibration, click "
" to save and return to the previous interface; click "
"
to load default value.
Channel Calibration Other Variables Calibration
