icetro ISI-300TA, Руководство пользователя

Страница: 8 / 40

8
How to Unpack and Install the Ice Cream maker
This soft & yogurt ice cream maker has been inspected at the factory prior to shipping out.
Remove the wooden or other packaging; if the product is found to be damaged during
transport, contact the local agent or manufacturer.
Check the serial number both outside and inside the product, since it is required when inquiring
about the product or requesting for customer service. Contact the local agent or a professional
service supplier to install or move the product.
1. Remove the wooden packaging, taking care not to damage the exterior of
the ice cream maker.
2. Remove the protective tapes and check the parts.
※Caution : Watch out for electric conduction when tilting or moving the product.
●
Where to Install/Cautions
1. Do not install the product on any tilted or uneven surface.
- Otherwise, there will be danger of electric conduction or malfunction of the product.
2. Install the product in an indoor place with minimal direct sunlight, wind, or rain.
- Water from the ice cream-making process or rainwater may cause short circuit, fire,
or electric shock.
3. Install the product in a place without the direct influence of sea air or toxic gas.
- It may give rise to complaints from customers selling ice cream from this maker.