Ice TRICE 'Q', Пошаговая инструкция по сборке и руководство пользователя

Страница: 16 / 57

16
2.7b Assembling the seat – hard-shell seat
The hard-shell seat is supplied with 2 seat mounting
brackets, which have to be fastened to the seat. The
lower bracket is the wider one, and fastens
underneath through the pre-drilled holes. The upper
bracket is narrower, and can be mounted in one of
two positions. The lower position is used for most
riders. The upper position is only for those riders that
want maximum seat recline. In this upper position,
the rear suspension will have to be pulled further out
of the main frame.
The flag mount bracket consists of 2 metal clips and a
short length of stainless steel tubing with one end
partially closed. The flag mount is positioned on the
back of the seat as shown in the photograph, with the
closed end facing down.
The ‘Love Handles’ help keep the rider located on the
hard-shell seat; their installation is optional. To install
the Love Handles, bolt the slots on the Handles
through the pre-drilled holes in the seat with the Love
Handles resting on the inside surface of the seat. The
washers go on the back of the seat. Install the
supplied covers. The Love Handles can be adjusted
for width by loosening the bolts and sliding them to
the required position.
To install the breathable cover, slip the pockets on each end of the cover over the ends of the seat, paying
attention that the Velcro fastenings line up (if they don’t, the cover is on upside down). Press the cover firmly
onto the Velcro.