Ice TRICE 'Q', Пошаговая инструкция по сборке и руководство пользователя

Страница: 35 / 57

35
4.6 Neck rest
Assembly
The neckrest cover needs to be installed on the neckrest frame. Put your
fingers up inside the cover, and peel apart the Velcro® strip near the top.
Now slide the cover over the frame as shown until the top of the frame is
past the Velcro® and is located snugly inside the top of the cover. It is
meant to be a tight fit.
The neck rest is assembled as shown in the diagrams. The cup and socket
washers allow the neck rest to be adjusted forward and back, and sliding the
head rest assembly in the clamping bars allows adjustment for height. An
additional adjustment for angle can be made by reversing the fittings on the
base. There are 2 notches in the base that can engage the rivet on the top
seat rail. The notches are different depths, and by changing which way the
base is clamped on, can change the angle of the whole assembly.
If you have a hard-shell seat, the headrest is fastened to the seat using 2
small clamps and a triangular backing plate. Assemble the headrest as
shown in the diagram below; the location of the aluminium and black plastic
spacers can be altered to adjust the closeness of the headrest from the seat.
Mesh Seat Models
Hard-shell Seat Models