IC Realtime Max 16, Руководство пользователя

Страница: 81 / 140

©2009 IC Realtime, Inc. 81
effective matrix or not. The system will continue executing the scheduled tour
assuming the following two conditions:
The video output function has not been enabled.
There is no video matrix setup available.
If there is valid video matrix setup, the system can activate the corresponding tour
amongst the alarm channels, and then also begin the scheduled tour after the alarm
tour completes.
If there is no schedule tour available, the matrix will stop at the last activation
channel after the alarm ends.
Motion detection activation is almost the same as the alarm, but it has different
priorities. The system will continue executing the scheduled tour assuming the
following two conditions:
Video output function has not been enabled.
There is no video matrix setup available.
If there is a valid video matrix setup, the system will check whether there is a tour of
higher priority and then execute the corresponding process. During the motion
detection tour, the system will process alarm triggers first if an alarm occurs. It is the
same as if an alarm occurs in a scheduled tour period.
5.6
5.6 5.6
5.6 IIIInformation
nformation nformation
nformation
Here is for you to view system information. There are total five icons: HDD (hard disk
information), BPS (data stream statistics), Log and version, and online user. See
Figure 5-43.
Figure 5-43
5.6.1 HDD Information
This interface lists the installed HDD’s as well as the total space, free space, video
start time and status. See Figure 5-44.
Note:
Please remove a damaged hard disk before you add a new one.