IC Realtime Max 16, Руководство пользователя

Страница: 54 / 140

©2009 IC Realtime, Inc. 54
Figure 4-37
4.9.6 Activate Pattern Function
In Figure 4-34, input the desired pattern preset value in the No. field and click pattern
to activate it.
4.9.7 Auto Scan Setup
In Figure 4-33, click border button. You can see an interface is shown as in Figure
4-28.
Go to Figure 4-30. Use the directional arrows to select the camera’s left limit.
Then please go to Figure 4-38 and click left limit.
Repeat the above procedures to set the right limit.
Figure 4-38
4.9.8 Activate Auto Scan
In Figure 4-34 click Auto Scan to begin the auto scan. Click stop to end the scan.
Correspondingly, the auto scan button becomes to stop button. Click stop button to
terminate scan operation.
4.10
4.10 4.10
4.10 Flip
Flip Flip
Flip
In Figure 4-34, click page switch button, you can see an interface is shown as below.
See
Figure 4-39. Here you can set auxiliary function.
Click page switch button again, system goes back to Figure 4-30.