manualshive.com logo in svg

IC Realtime 1U POE NVR Series, Руководство пользователя

Поделиться
Скачать
IC Realtime 1U POE NVR Series Скачать руководство пользователя страница 171

1. Click

of the corresponding date, and then set the period on the pop-up

interface. Click

OK

to save.

◇

Up to six periods can be configured for each day.

◇

Under

Copy

, select

All

to apply the settings to all the days of a week, or

select specific day(s) that you want to apply the settings to.

2.

Click

Apply

to save the settings.

Step 5

Click

Apply

button to complete setup.

4.7.2.9 ANPR

The Automatic number-plate recognition (ANPR) function uses optical character recognition on
images to read vehicle registration plates. Note that this function is for IC Realtime
ANPR-equipped cameras connected to IC realtime ANPR-supported NVRs.
This section configures the different plate recognition rules, alarm linkage actions
depending on set conditions (blacklist, whitelist and regular).
Step 1

Select

Main Menu > Advanced Settings > Alert Center

>

Parameters

>

ANPR

. The

ANPR

interface will be displayed. See Figure 4-164.

Figure 4-164

Step 2

Select the

Enable

check box to enable ANPR.

Step 3

Click

General

(default),

Blacklist

or

Whitelist

tab to configure the respective options..

Before enabling the blacklist or whitelist alarm, you will need to add the corresponding plate

information to the database. Refer to "4.7.3.3 Black/whitelist" for detailed information.

●

Regular: The NVR will trigger an event alarm when it detects any plate number.

●

Blacklist: The NVR will trigger an event alarm when it detects a plate number in
the blacklist.

160

Содержание 1U POE NVR Series




































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды