IC Realtime 1U POE NVR Series, Руководство пользователя

Страница: 149 / 291

Record Channel
Select the check box and select the desired recording channel
(supports multiple choices). when an event occurs, the NVR
will record the channels selected.
Alarm recording should be enabled in Storage Schedule.
For details, see "4.1.4.6 Schedule".
PTZ Linkage
Select the check box and click Setting to select the channel
and PTZ action. When an event occurs, the NVR will have the
selected channel perform the corresponding PTZ action. For
example, activate the PTZ in channel one to turn to the preset
point X.
● Tripwire events only supports PTZ preset point activation.
● Corresponding PTZ actions must be configured prior,
see "4.4.4 Calling PTZ Functions".
Post-Record
When the event ends, the alarm will extend for the specified
time. The time range is from 0 seconds to 300 seconds.
Tour
Click to select the check box and then select the channel(s)
for the tour. When the event is triggered, the local interface of
the NVR device will display the selected channel(s) on the
screen.
● It is recommended to set the interval and tour mode
beforehand. See "4.17.2 Tour".".
● After the tour ends, the previous screen split mode will
resume.
Log
When enabled, the triggered IVS events will be
recorded into the NVR system log.
Parameter Description
Alarm Tone
The NVR will play a specified audio file when the event
occurs.
To enable, check the box and then select the corresponding
audio file from the drop-down list.
Refer to "4.18.1 File Management" to add audio files.
Buzzer
Select the check box to activate the onboard buzzer when an
event occurs.
Step 5 Click OK to save the alarm setting.
System displays the IVS interface.
Step 6 Select the Enable check box and click Apply to complete the tripwire setting.
4.7.2.4.2 Intrusion
138