IC Realtime 1U POE NVR Series, Руководство пользователя

Страница: 168 / 291

Figure 4-161
Step 3 Select Channel and then click Add .
Step 4 Select the Enable check box.
Step 5 Click to draw queuing rule and area.
Step 6 Click under the Parameters column, and then select alarm type to Queue
People No. Alarm or Queue Time Alarm .
Step 7 Click under the Trigger column and configure alarm linkages.
Table 4-49
Parameter Description
Period
Configures the date/time schedule when the function will be
active.
Alarm Out
When the event is triggered, this will trigger an alarm device (such
as lights, sirens, etc.) connected to the NVR alarm output port.
Latch
When the event ends, the alarm will extend for the specified time.
The time range is from 0 seconds to 300 seconds.
Alarm Upload
Select the check box. when an alarm event occurs, the NVR device
uploads an alarm signal to the network (including the alarm center).
● Not all NVR models support this feature.
● you will need to set the alarm center first. For details, see
"4.12.13 Alarm Center".
Send Email
When selected, the NVR sends an Email to the set receivers when the
event is triggered.
Email settings must be configured prior. For details, see "4.12.10
Email".
157